962 Wheel Loader

Engine

Engine Power - 2,100 rpm ISO 14396:2002

269 hp

Engine Power - 2,100 rpm ISO 14396:2002

273 hp (metric)

Engine Model

Cat® C7.1

Gross Power - 2,100 rpm SAE J1995:2014

273 kW

Gross Power - 2,100 rpm SAE J1995:2014

277 hp (metric)

Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011

255 hp (metric)

Engine Torque - 1,400 rpm ISO 14396:2002

918 lbf·ft

Gross Torque - 1,400 rpm SAE J1995:2014

926 lbf·ft

Net Torque - 1,400 rpm ISO 9249:2007, SAE J1349:2011

867 lbf·ft

Displacement

427 in³

Emissions

Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

Biodiesel Capability

Up to B20¹

Note (1)

The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

Note (2)

¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100%

Weights

Operating Weight

44469 lb

Note

Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear

Transmission

Forward - 1

4.3 mile/h

Forward - 2

7.5 mile/h

Forward - 3

12 mile/h

Forward - 4

16 mile/h

Forward - 5

24.5 mile/h

Reverse - 1

4.3 mile/h

Reverse - 2

7.5 mile/h

Reverse - 3

16 mile/h

Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Sound

Operator Sound Pressure Level - ISO 6396:2008

70 dB(A)

Exterior Sound Power Level - ISO 6395:2008

107 dB(A)

Operator Sound Pressure Level - ISO 6396:2008 ¹

69 dB(A)

Exterior Sound Power Level - ISO 6395:2008²

104 dB(A)

Note (1)

¹Including countries that adopt the EU and UK Directives.

Note (2)

²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system

Operating Specifications

Static Tipping Load - Full 40° Turn - With Tire Deflection

25869 lb

Static Tipping Load - Full 40° Turn - No Tire Deflection

27529 lb

Breakout Force

42489 lbf

Note (1)

For a machine configuration as defined under “Weight.”

Note (2)

Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Service Refill Capacities

Fuel Tank

68.6 gal (US)

DEF Tank

4 gal (US)

Cooling System

14.3 gal (US)

Crankcase

5.5 gal (US)

Transmission

11.4 gal (US)

Differential - Final Drives - Front

11.4 gal (US)

Differential - Final Drives - Rear

11.4 gal (US)

Hydraulic Tank

25.6 gal (US)

Hydraulic System

Implement System - Maximum Pump Output at 2,340 rpm

85 gpm

Implement System - Maximum Operating Pressure

4250 psi

Hydraulic Cycle Time - Total

9.4 s

Dimensions - Standard Lift

Height - Top of Hood

8.75 ft

Height - Top of ROPS

11.25 ft

Ground Clearance

1.08 ft

Wheel Base

10.92 ft

Overall Length - Without Bucket

23.83 ft

Hinge Pin Height at Carry Height

2.17 ft

Hinge Pin Height at Maximum Lift

13.83 ft

Lift Arm Clearance at Maximum Lift

11.33 ft

Rack Back - Maximum Lift

55 °

Rack Back - Carry Height

51 °

Width over Tires (Loaded)

9.33 ft

Tread Width

7 ft

Note

All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.

Dimensions - High Lift

Height - Top of Hood

8.75 ft

Height - Top of ROPS

11.25 ft

Ground Clearance

1.08 ft

Wheel Base

10.92 ft

Overall Length - Without Bucket

25.17 ft

Hinge Pin Height at Carry Height

2.5 ft

Hinge Pin Height at Maximum Lift

14.75 ft

Lift Arm Clearance at Maximum Lift

11.83 ft

Rack Back - Maximum Lift

56 °

Rack Back - Carry Height

48 °

Width over Tires (Loaded)

9.33 ft

Tread Width

7 ft

Note

All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.