140 GC Motor Grader
Exterior View
Please contact your nearest store for rates and other details.
Product Specs
Engine
- Engine Power (ISO 14396)
- 196 hp
- Bore
- 4.1 in
- Derating Altitude
- 9842 ft
- Displacement
- 427.8 in³
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
- Cat 7.1
- Engine RPM
- 2,200
- Standard Capability
- 109 °F
- High - Ambient Capability
- 122 °F
- Maximum Torque - ISO 9249
- 616 lb/ft
- Stroke
- 5.3 in
- Torque Rise - ISO 9294
- 40%
- Number of Cylinders
- 6
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
- Note (2)
- Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Note (3)
- Power as declared per ISO 14396
- Engine Power AWD (ISO 14396)
- 196 hp
Weights
- Operating Weight - Typically Equipped
- 38725 lb
- Note
- *Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
Moldboard
- Blade Width
- 12 ft
- Arc Radius
- 16.3 in
- Blade Height
- 24 in
- Cutting Edge Width
- 6 in
- End Bit
- 6 in
- Throat Clearance
- 4.4 in
Dimensions
- Width All Wheel Drive (AWD)
- 99.3 in
- Length of Machine*
- 406.7 in
- Maximum Height
- 132.4 in
- Width
- 95.6 in
- Note
- *Typically equipped with push block and ripper.
Blade Range
- Circle Center Shift Left
- 29.6 in
- Circle Center Shift Right
- 28.7 in
- Maximum Depth of Cut
- 28.1 in
- Maximum Lift Above Ground
- 18.7 in
- Maximum Shoulder Reach Left
- 74.3 in
- Maximum Shoulder Reach Right
- 71.3 in
- Moldboard Side Shift Left
- 25.6 in
- Moldboard Side Shift Right
- 20.7 in
- Blade Tip Range Backward
- 5
- Blade Tip Range Forward
- 40
Service Refill Capacities
- Fuel Tank
- 78 gal (US)
- Circle Drive with Slip Clutch
- 2 gal (US)
- Circle Drive without Slip Clutch
- 0.5 gal (US)
- Cooling System
- 40 l
- Engine Crankcase
- 5.5 gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Only)
- 4.2 gal (US)
- Hydraulic System
- 11.9 gal (US)
- Transmission
- 4.8 gal (US)
Weight
- All-Wheel Drive Weight (AWD) (Stage V)*
- 40543 lb
- All-wheel Drive Weight (AWD) (Tier 4 Final)**
- 42119 lb
- Weight (Tier 4 Final)**
- 40488 lb
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Cab
-
- Standard Seat
- Steering Wheel/Lever Controls
- Base Cab
- Information Display Screen
- Halogen Lighting
- Entertainment Radio Ready
- Product Link
- Cell Phone Holder
-
- Powertrain
-
- Cat C7.1
- Eco mode
- On-Demand Fan
- No-Spin Differential
-
- Safety
-
- Parking Brake
- Signaling/Warning Horn
- Rearview Mirror
- Hydraulic Brakes
- Sideview Mirrors
- Walkways and Grab Rails
- Hydraulic System with Integrated Work Port Pressure Relief
- Hydraulic System with Integrated Dead Engine Implement Lower
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Cab
-
- Mechanical Suspension Seat
- Air Suspension Seat
- ROPS/FOPS
- Heating/Cooling Cab System
- Rear Wiper
- Canopy
- Cab Plus
- Rear Window Screen
- Front Wipers
- Digital Blade Slope Meter
-
- Powertrain
-
- Reversing Fan
- All-Wheel Drive (AWD)
-
- Drawbar Circle Moldboard
-
- Circle Drive Slip Clutch
- Circle Saver
-
- Safety
-
- Rearview Camera
- Secondary Steering System
- Front View Camera
- Four-point Safety Harness Seat Belt
-
- Versatility
-
- Scarifier
- Counterweight
- Push Block
- Front Lift Group From Factory
- Snow Wing
- Front Blade
- L3 Tires
- Sy-Klone Pre-Cleaner