Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, m
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V emission standards
Weights
Operating Weight - Typically Equipped
31958 lb
Note
* Typically equipped machine weight is calculated with full fluids, ROPS HVAC CAB, 12' basic blade, push plate, ripper, 14-24 tires on multi-piece rims and operator.
Operating Weight - Typically Equipped - Front Axle
8708 lb
Operating Weight - Typically Equipped - Rear Axle
23250 lb
Moldboard
Blade Width
12 ft
Cutting Edge Width
6 in
End Bit - Width
152 in
Arc Radius
16.3 in
Blade Height
20 in
Throat Clearance
4.7 in
Machine Weight
All-Wheel Drive (AWD) Weight
36376 lb
Dimensions
Length of Machine*
391.4 in
Width
94.6 in
Maximum Height
149.1 in
Note
*Typically equipped with push block and ripper.
Blade Range
Moldboard Sideshift - Right
26.1 in
Circle Centershift - Left
25.8 in
Blade Tip Range - Forward
40°
Circle Centershift - Right
25.8 in
Moldboard Sideshift - Left
20.2 in
Maximum Lift Above Ground
16.1 in
Blade Tip Range - Backward
5°
Maximum Depth of Cut
30.5 in
Service Refill Capacities
Engine Crankcase
2 gal (US)
Hydraulic System
11.9 gal (US)
Fuel Tank
71 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
3.2 gal (US)
Circle Drive without Slip Clutch
0.4 gal (US)
Transmission
4 gal (US)
Cooling System
10.3 gal (US)
Circle Drive with Slip Clutch
1.8 gal (US)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Sustainability
Recyclability
92%
Power Train
Transmission
Countershaft Torque, Converter Powershift
Forward/Reverse Gears
6 Forward / 3 Reverse
Operating Specifications
Steering Range - Left/Right
47.5° left or right
Articulation Angle - Left/Right
20� left or right
Standard Equipment
Cab
Standard Vinyl Seat
Adjustable Steering Wheel/Lever Controls
Seat Belt
Electric Throttle Control
ROPS/FOPS
Cab Storage
Halogen Lighting
Cup Holder
Dome Interior Light
Coat Hook
Product Link
Powertrain
Cat C4.4 Engine
Eco mode
On-Demand Fan
43° C (109° F) Ambient Capacity
No-Spin Differential
Engine Idle Shutdown Timer
Safety
Parking Brake
Signaling/Warning Horn
Rearview Mirror
Hydraulic Brakes
Side View Mirrors
Walkways and Grab Rails
Drawbar Circle Moldboard
Standard
Electrical
Sealed Alternator
Reversing Lights
Breaker Panel
750 CCA Standard Duty Batteries
Electric Starter
Service And Maintenance
Grouped Location for Engine Oil and Fuel Filters
Extended Life Coolant
Guards
Transmission Guard
Attachments
Cab
Mechanical Suspension Seat
Air Suspension Seat
Heating/Cooling Cab System
Defrost Fans
Rear Wiper
Base Cab
Canopy
Cab Plus
Entertainment Radio Ready
Rear Window Screen
Front Wipers
Digital Blade Slope Meter
Powertrain
Reversing Fan
Heavy Duty Starter
50� C (122� F) Ambient Capacity
All-Wheel Drive (AWD) - available on Stage V machines only