U.S. EPA Tier 4 Final / EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800 r/min
Peak Net Torque (1,300) rpm)
1479 lbf·ft
Torque Rise
33%
Bore
5.4 in
Stroke
6.7 in
Displacement
927.6 in³
High Idle Speed
2300 r/min
Low Idle Speed
800 r/min
Maximum Altitude - Without Derating (Tier 4 Final/Stage V)
9298 ft
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Specifications
Maximum Operating Weight (Tier 4 Final/Stage V)
78326 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
77340 lb
Transmission
Transmission Type
Planetary - Powershift - ECPC
Travel Speeds - Forward - First
3.4 mile/h
Travel Speeds - Forward - Second
6.4 mile/h
Travel Speeds - Forward - Third
11.1 mile/h
Travel Speeds - Reverse - First
4.1 mile/h
Travel Speeds - Reverse - Second
7.3 mile/h
Travel Speeds - Reverse - Third
12.2 mile/h
Hydraulic System
Pump Flow at 1,800 rpm
30.9 gpm
Main Relief Pressure
3771 psi
Maximum Supply Pressure
3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm x 1070 mm (4.7 in x 42.1 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
95.25 mm x 215 mm (3.75 in x 8.5 in)
Service Refill Capacities
Cooling System
30.6 gal (US)
Engine Crankcase
9 gal (US)
Transmission
17.4 gal (US)
Fuel Tank
206.6 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
Differential - Final Drives - Front
26.4 gal (US)
Differential - Final Drives - Rear
29.1 gal (US)
Hydraulic Tank Only
35.4 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H
Axles
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
± 8 °
Braking System
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit
Pilot operated, load sensing
Bore
4.5 in
Stroke
22.7 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm / 44.9 gal/min @ 1,800 rpm
Steering Pressure Limited
3481 lb/in²
Vehicle Articulation Angle
86 degrees
Blades
Moldboard - Length
14.4 ft
Height - Including Cutting Edge
3.4 ft
Maximum Depth of Cut
1.97 ft
Maximum Lift Above Ground
3.14 ft
Blade Tip Angle - Total
14.8°
Blade Tip Angle - Forward
7.3°
Blade Tip Angle - Back
7.5°
Blade Tilt Angle - Right - Mechanical
5.1°
Blade Tilt Angle - Left - Mechanical
4.1°
Blade Tilt Angle - Right - Hydraulic
6.3°
Blade Tilt Angle - Left - Hydraulic
5.4°
Blade Tilt Angle - Right Full
10.8°
Blade Tilt Angle - Left Full
10.1°
Total Tilt Adjustment
2.9 ft
Width - Over End Bits
15.18 ft
Wheels
Weight
16167 lb
Outside Diameter
5.5 ft
Drum Diameter
4.3 ft
Drum Width
3.7 ft
Tips per Wheel
65
Width - Over Drums
11.97 ft
Wheels - High Impact
Weight
16610 lb
Outside Diameter
5.5 ft
Drum Diameter
4.3 ft
Drum Width
3.8 ft
Tips per Wheel
65
Width over Drums
11.97 ft
Dimensions (Approximate)
Height - Top of Beacon
14.5 ft
Height - Top of Cab Roof
13.4 ft
Height - Top of Exhaust Pipe
14.1 ft
Height to Top of Hood
10.5 ft
Ground Clearance - Bumper
2.8 ft
Ground Clearance
1.7 ft
Ground Clearance to Trunnion
1.47 ft
Length - With Blade on Ground
28 ft
Centerline of Rear Axle to Bumper
9.3 ft
Hitch to Centerline of Front Axle
6.1 ft
Wheel Base
12.2 ft
Width - Over Wheels
11.12 ft
Standard Equipment
Note
Standard and optional equipment may vary. Consult your Cat® dealer for details.
Operator Environment
Air conditioner
Cab, sound-suppressed pressurized
Cab door, sliding window (LH)
Camera, Rear Vision
Cat Detect: object detection (ready)
Coat and hard hat hooks
Electrohydraulic tilt and lift controls
Fingertip shifting controls
Flip-up armrest
Glass (window) - rubber-mounted glass
Heater and defroster
Horn, electric
Hydraulic controls - seat mounted
Implement hydraulic lockout
Instrumentation, gauges: – Diesel exhaust fluid (DEF) level (Tier 4 Final/Stage V only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
Radio, CB (ready)
Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp) and power port
Seat belt with minder, retractable, 76 mm (3 in) wide
Slope Indicate
Steering and Transmission Integrated Control (STIC™) system with lockout
Transmission gear (indicator)
Vital Information Management System (VIMS™): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
Wet-arm wipers/washers (front and rear)
Powertrain
Air-to-air aftercooler
Brakes, full hydraulic, enclosed, wet multiple disc service brakes