Cat 740 Articulated Truck

Engine

Engine Model

Cat® C15

Gross Power (SAE J1995)

452 hp

Net Power (SAE J1349)

439 hp

Engine Power (ISO 14396)

447 hp

Bore

5.4 in

Stroke

6.75 in

Displacement

926 in³

Note (1)

Advertised power is tested at 1,700 rpm.

Note (2)

Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (3)

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, aftertreatment, and fan at minimum speed.

Note (4)

Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.

Note (5)

Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.

Note (6)

Diesel exhaust fluid (DEF) used in Cat selective catalytic reduction (SCR) systems must meet the requirements outlined in ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

No Engine De-rating Below

10000 ft

Peak Engine Torque Gross (SAE J1995)

1711 lbf·ft

Peak Engine Torque Net (SAE J1349)

1670 lbf·ft

Peak Engine Torque Speed

1200 r/min

Weights

Rated Payload

40 ton (US)

Body Capacities

Heaped (SAE 2:1)

29.7 yd³

Struck

23.2 yd³

Tailgate Heaped SAE 2:1

32 yd³

Tailgate Struck

24.4 yd³

Transmission

Forward - 1

4 mile/h

Forward - 2

5.3 mile/h

Forward - 3

7.3 mile/h

Forward - 4

9.2 mile/h

Forward - 5

12.2 mile/h

Forward - 6

14.9 mile/h

Forward - 7

20.6 mile/h

Forward - 8

24.7 mile/h

Forward - 9

35.7 mile/h

Reverse - 1

4.2 mile/h

Reverse - 2

9.8 mile/h

Sound Levels

Interior Cab

72 dB(A)

Note (1)

The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan

Note (2)

Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty

43200 lb

Center Axle - Empty

14804 lb

Rear Axle - Empty

14562 lb

Total - Empty

72565 lb

Front Axle - Rated Load

7002 lb

Center Axle - Rated Load

36513 lb

Rear Axle - Rated Load

36513 lb

Total - Rated Load

80027 lb

Front Axle - Loaded

50201 lb

Center Axle - Loaded

51317 lb

Rear Axle - Loaded

51074 lb

Total - Loaded

152593 lb

Body Plate

Type

High strength Brinell HB450 wear resistant steel

Body Plate Thickness

Front Plate

0.28 in

Base Plate

0.51 in

Side Plates

0.43 in

Service Refill Capacities

Fuel Tank

145.3 gal (US)

Cooling System

23.7 gal (US)

Brake Cooling Tank

17.7 gal (US)

Steering/Hoist Hydraulic System

36.9 gal (US)

Engine Crankcase

13.7 gal (US)

Transmission - OTG

19.8 gal (US)

Final Drive - Each

1.3 gal (US)

Axles - Each

15.8 gal (US)

DEF Tank

6.5 gal (US)

Body Hoist

Raise Time

12 s

Lower Time

12 s

Standards

Brakes

ISO 3450 – 2011

Cab - FOPS

ISO 3449 Level II – 2005

Cab - ROPS

ISO 3471 – 2008

Steering

ISO 5010 – 2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right

45°

Turning Dimensions - SAE Turning Radius

303 in

Turning Dimensions - Clearance Radius

330 in

Turning Dimensions - Inside Radius

156 in

Turning Dimensions - Aisle Width

220 in

Note

Dimensions are for machines equipped with 29.5 R25 tires.

Steering

Lock to Lock

4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavator: 374 - Passes

3-4

Hydraulic Excavator: 352 - Passes

5-6

Wheel Loader: 972 - Passes

3

Wheel Loader: 966 - Passes

4-5

Wheel Loader: 962 - Passes

5

Note

An optimum system match gives you a major productivity advantage. The 740 is an excellent match for the Cat 374 and 352 Hydraulic Excavators; and Cat 972, 966, and 962 Wheel Loaders. Having matched loading and hauling tools results in increased production