Product Specs
Engine
- Engine Model
- Cat® C18
- Engine Power - EU Stage V Engine - ISO 14396:2002
- 598 hp
- Engine Power - Tier 3 Engine - ISO 14396:2002
- 581 hp
- Engine Power - VR Engine - ISO 14396:2002
- 581 hp
- Bore
- 5.7 in
- Stroke
- 7.2 in
- Displacement
- 1104.53 in³
- Note (1)
- Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
- Note (2)
- All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
- Note (3)
- Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
- Note (4)
- Optional Ventilation Reduction Package available.
- Note (5)
- Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
- Note (6)
- Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note (7)
- *<5 %
Operating Specifications
- Nominal Payload Capacity
- 99208 lb
- Gross Machine Mass
- 196765 lb
- Shipping Mass (Stage V Engine Model)
- 96225 lb
- Shipping Mass (Other Engine Models)
- 94415 lb
- Body Capacities
- 18.0-25.1 m³ (23.5-32.8 yd³)
Weights (Stage V Engine Model)
- Operating Mass
- 91285 lb
- Operating Mass - Front Axle
- 64565 lb
- Operating Mass - Rear Axle
- 26720 lb
- Operating Mass + Rated Payload
- 190495 lb
- Operating Mass + Rated Payload - Front Axle
- 89235 lb
- Operating Mass + Rated Payload - Rear Axle
- 101260 lb
Weights (Other Engine Models)
- Operating Mass
- 88320 lb
- Operating Mass - Front Axle
- 61225 lb
- Operating Mass - Rear Axle
- 27095 lb
- Operating Mass + Rated Payload
- 187530 lb
- Operating Mass + Rated Payload - Front Axle
- 85355 lb
- Operating Mass + Rated Payload - Rear Axle
- 102175 lb
Weight Distribution (Stage V Engine Model)
- Empty - Front Axle
- 70.7%
- Empty - Rear Axle
- 29.3%
- Loaded - Front Axle
- 46.8%
- Loaded - Rear Axle
- 53.2%
Weight Distribution (Other Engine Models)
- Empty - Front Axle
- 69.3%
- Empty - Rear Axle
- 30.7%
- Loaded - Front Axle
- 45.5%
- Loaded - Rear Axle
- 54.5%
Body Hoist (Stage V Engine Model)
- Raise
- 15 Seconds
- Lower
- 21 Seconds
- Total Cycle Time
- 36 Seconds
Body Hoist (Other Engine Models)
- Raise
- 14 Seconds
- Lower
- 21 Seconds
- Total Cycle Time
- 35 Seconds
Body Capacities
- Dump Body - 1
- 23.6 yd³
- Dump Body - 2 - Standard
- 27.9 yd³
- Dump Body - 3
- 32.8 yd³
- Ejector Body
- 29.9 yd³
- Note
- Heaped SAE 2:1.
Turning Dimensions
- Outside Clearance Radius*
- 371 in
- Inside Clearance Radius*
- 209 in
- Frame Oscillation
- 10°
- Articulation Angle
- 42.5°
- Note
- *Clearance dimensions are for reference only.
Transmission
- Forward - 1
- 4.4 mile/h
- Forward - 2
- 5.9 mile/h
- Forward - 3
- 8 mile/h
- Forward - 4
- 10.8 mile/h
- Forward - 5
- 14.6 mile/h
- Forward - 6
- 19.7 mile/h
- Forward - 7
- 26.4 mile/h
- Reverse - 1
- 4.2 mile/h
- Reverse - 2
- 5.6 mile/h
- Note
- Maximum travel speeds with standard 29.5 × R29 tires.
Service Refill Capacities
- Engine Crankcase - With Filter
- 16.9 gal (US)
- Transmission
- 15.9 gal (US)
- Hydraulic Tank
- 70.3 gal (US)
- Cooling System
- 22.5 gal (US)
- Front Differential and Final Drives
- 20.3 gal (US)
- Rear Differential and Final Drives
- 21.9 gal (US)
- Fuel Tank
- 201.8 gal (US)
Tires
- Tire Size
- 29.5 × R29
Standards
- Standards
- ROPS/FOPS Certified Cab
Final Drives
- Differential Ratio
- 3.46:1
- Final Drive Ratio
- 5.65:1
- Total Reduction Ratio
- 19.55:1
Standard Equipment
-
- Electrical
-
- 12V power supply in cab
- Alternator, 95-amp
- Auxiliary start receptacle
- Battery disconnect switch, ground level
- Circuit breaker, 80-amp
- Corrosive protection spray
- Diagnostic connector
- Electric starting, 24V
- Engine shutdown switch, ground level
– Front left hand side - Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED - Low maintenance batteries
- Reversing alarm
- Starting and charging system
-
- Operator Environment
-
- Cat Electronic Monitoring System (Cat EMS)
- Electric horns
- Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer - Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal - Low hydraulic level warning
- Open operator station ROPS/FOPS structure
- Operator presence system (auto park brake)
- Rearview mirrors
- Suspension seat Cat Comfort TLV2 with retractable seat belt
- Trainer/passenger seat and seat belt
- Tilt/telescopic steering wheel
- Turn signal indicators
-
- Power Train
-
- Cat C18 ATAAC diesel engine, 6-cylinder
- Automatic brake retarder control
- Auto shift transmission 7 speed forward/2 speed reverse
- Control throttle shifting
- Engine air intake precleaner
- Electric fuel priming pump
- Exhaust, turbo compartment shielding
- Four wheel drive
- Long life coolant
- Programmable ground speed limiting
- Programmable gear block out with tray up
- Radiator cap manual release
- Radiator, cross flow
- SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
- Torque converter, standard with automatic lockup
-
- Other Standard Equipment
-
- Body, dump, (21.3 m³, 27.9 yd³)
- Catalytic exhaust purifier/muffler group
- Centralized lubrication points
- Decals, international picto graphics
- Dual fuel tanks
- Engine and transmission belly guards
- Fenders, front, rear flaps
- Fire wall
- Fuel system manual shut off tap
- Front axle suspension
- Frame lifting lugs
- Front and rear tow pin
- Front rubber bumpers
- Gauges, brake pressure
- Hand hold (access on/off top deck)
- Hitch, articulated and oscillated
- Operation and Maintenance Manual – English and other applicable local languages to select
- S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil - Swing out radiator grill
- Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
Attachments
-
- Optional Equipment
-
- Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch - Body dump
– Body (18.0 m³, 23.5 yd³)
– Body (25.1 m³, 32.8 yd³) - Body ejector
– Ejector (22.9 m³, 30.0 yd³) - Body liners, impact and/or wear
– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³) - Body wear plate, external
– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³) - Camera
– Color rear facing
– Color loading - Cover, anti vandalism for shipping
- Engine options
– Engine, Stage V
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only) - DPF (Flow Through) Filter
- Fast fill system
– Coolant
– Engine oil
– Fuel (dual tanks)
– Hydraulic oil
– Transmission oil - Fire suppression system
– Ansul, wet - Fluids
– Arctic fuel
– Arctic coolant - Handrail Extension
- Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body - Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded) - Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door - Park brake switch engagement
– Push to apply
– Pull to apply - Payload
– Truck Payload Measurement System (TPMS) - Reflective tape
- Rims
– Rim identification numbering
– Spare, tubeless - Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical - Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion - Secondary steering system
- Service tools
– Collet jacking bolts, dump or ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available - Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer - Technology
– Product Link Elite (PLE) system - Tire arrangements
– Tire, 29.5 × R29 VSNT Bridgestone
– Tire, 29.5 × R29 VSDL Bridgestone - Torque converter, high altitude, 3000 m (9,842 ft) and up
- NOTE: Not all features are available in all regions. See your Cat dealer for more information.
- Battery shutdown