980 GC Wheel Loader

Engine

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011

393 hp

ISO 9249:2007 (DIN)

398 hp (metric)

Engine Power @ 1,700 rpm – ISO 14396:2002

420 hp

ISO 14396:2002 (DIN)

426 hp (metric)

Gross Power @ 1,700 rpm – SAE J1995:2014

425 hp

Engine Model

Cat C13A

Engine Torque @ 1,200 rpm - ISO 14396:2002

1612 ft·lbf

Gross Torque @ 1,200 rpm – SAE J1995:2014

1627 ft·lbf

Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011

1539 ft·lbf

Bore

5.12 in

Stroke

6.18 in

Displacement

763 in³

Note (1)

Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV, and Japan 2014 (Tier 4 Final) emission standards.

Note (2)

The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

Note (3)

Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases on a lifecycle basis: • Up to B20 biodiesel (FAME) ** • Up to 100% HVO and GTL renewable fuels

Weights

Operating Weight*

65610 lb

Note (1)

*Weight based on a machine configuration with standard ambient cooling, open differential axles, Maxam MS405 L4 tires, standard counterweight, full fluids, operator and 5.5 m³ (7.2 yd³) bucket with BOCE.

Buckets

Bucket Capacities

4.3 - 5.8 m³ (5.75 - 7.5 yd³)

Hydraulic System

Implement Pump Type

Variable Displacement Piston, Load Sensing

Implement System – Maximum Flow @ 2,250 rpm

110 gal(US)/min

Implement System - Maximum Operating Pressure

4090 psi

Implement System - Maximum Flow 3rd Function

66 gpm

Implement System - Maximum Operating Pressure 3rd Function

3000 psi

Hydraulic Cycle Time - Raise from Carry Position

5.3 s

Hydraulic Cycle Time – Dump at Maximum Raise

1.7 s

Hydraulic Cycle Time - Lower, Empty, Float Down

3.1 s

Hydraulic Cycle Time - Total Cycle Time

10.1 s

Operating Specifications

Static Tipping Load - Full 40° Turn - With Tire Deflection

42441 lb

Static Tipping Load - Full 40° Turn - No Tire Deflection

45089 lb

Breakout Force

47660 lbf

Note (1)

* For a machine configuration as defined under "Weight".

Note (2)

* Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Sound

Operator Sound Pressure Level - ISO 6396:2008

74 dB(A)

Exterior Sound Power Level - ISO 6395:2008

112 dB(A)

Operator Sound Pressure Level - ISO 6396:2008 ¹

74 dB(A)

Exterior Sound Power Level - ISO 6395:2008²

109 dB(A)

Note (1)

Including countries that adopt the EU and UK Directives

Note (2)

EU Noise Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701

Transmission

Forward - 1

4.1 mile/h

Reverse - 1

4.7 mile/h

Forward - 2

7.9 mile/h

Reverse - 2

9 mile/h

Forward - 3

14 mile/h

Reverse - 3

16 mile/h

Forward - 4

24.7 mile/h

Reverse - 4

24.7 mile/h

Note

Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 913 mm (36 in) roll radius.

Service Refill Capacities

Fuel Tank

112.5 gal (US)

DEF Tank

5.6 gal (US)

Cooling System

13.7 gal (US)

Crankcase

9.8 gal (US)

Transmission

20.3 gal (US)

Differential - Final Drives - Front

22.2 gal (US)

Differential - Final Drives - Rear

22.2 gal (US)

Hydraulic Tank

40.4 gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. *If equipped with R134a (Global Warning Potential = 1430), the system con

Dimensions - Standard Lift

Rack Back at Ground

292