120H Motor Grader
Please contact your nearest store for rates and other details.
Product Specs
Engine
- Base Power (1st Gear) - Net
- 124.72 hp
- Engine Model
- Cat® 3126B DITA ATAAC VHP
- VHP - Gears 4-8, Net
- 140 hp
- Base Power (All Gears) - Gross
- 139 hp
- VHP - Gears 1-3, Gross
- 139 hp
- VHP - Gears 4-8, Gross
- 154 hp
- Bore
- 4.3 in
- Stroke
- 5 in
- Speed at Rated Power
- 2000 RPM
- Torque Rise
- 50%
- Maximum Torque
- 544 lb/ft
- Base Power (All Gears) - Net
- 125 hp
- Displacement
- 439 in³
- VHP - Gears 1-3, Net
- 125 hp
- Number of Cylinders
- 6
- Derating Altitude
- 10000 ft
- Standard - Fan Speed - Maximum
- 1210 RPM
- Standard - Fan Speed - Minimum
- 500 RPM
- Standard - Ambient Capability
- 117 °F
- High Ambient - Fan Speed - Maximum
- 1300 RPM
- High Ambient - Fan Speed - Minimum
- 500 RPM
- High - Ambient Capability
- 122 °F
Moldboard
- Blade Width
- 12 ft
- Moldboard - Height
- 24 in
- Moldboard - Thickness
- 0.87 in
- Arc Radius
- 16.25 in
- Throat Clearance
- 4.7 in
- Cutting Edge Width
- 6 in
- Cutting Edge Thickness
- 0.63 in
- End Bit - Width
- 6 in
- End Bit - Thickness
- 0.63 in
- Blade Pull - Base GVW
- 17816 lb
- Blade Pull - Maximum GVW
- 23504 lb
- Blade Down Pressure - Base GVW
- 14488 lb
- Blade Down Pressure - Maximum GVW
- 20056 lb
Weights
- Gross Vehicle Weight - Maximum - Front Axle
- 11190 lb
- Gross Vehicle Weight - Maximum - Rear Axle
- 23116 lb
- Gross Vehicle Weight - Base - Front Axle
- 7959 lb
- Gross Vehicle Weight - Base - Rear Axle
- 19921 lb
- Gross Vehicle Weight - Maximum - Total
- 37306 lb
- Gross Vehicle Weight - Base - Total
- 27880 lb
Operating Specifications
- Top Speed - Forward
- 26.5 mile/h
- Top Speed - Reverse
- 20.9 mile/h
- Turning Radius - Outside Front Tires
- 23.6 ft
- Steering Range - Left/Right
- 50°
- Articulation Angle - Left/Right
- 20°
- Forward - 1st
- 2.3 mile/h
- Forward - 2nd
- 3.1 mile/h
- Forward - 3rd
- 4.5 mile/h
- Forward - 4th
- 6.2 mile/h
- Forward - 5th
- 9.7 mile/h
- Forward - 6th
- 13.2 mile/h
- Forward - 7th
- 18.2 mile/h
- Forward - 8th
- 26.5 mile/h
- Reverse - 1st
- 1.8 mile/h
- Reverse - 2nd
- 3.4 mile/h
- Reverse - 3rd
- 4.9 mile/h
- Reverse - 4th
- 7.7 mile/h
- Reverse - 5th
- 14.4 mile/h
- Reverse - 6th
- 20.9 mile/h
Service Refill
- Fuel Capacity
- 90 gal (US)
- Cooling System
- 10.4 gal (US)
- Hydraulic System - Total
- 17.7 gal (US)
- Hydraulic System - Tank
- 9.9 gal (US)
- Engine Oil
- 7.8 gal (US)
- Transmission - Differential - Final Drives
- 12.2 gal (US)
- Tandem Housing - Each
- 12.7 gal (US)
- Front Wheel Spindle Bearing Housing
- 0.13 gal (US)
- Circle Drive Housing
- 1.8 gal (US)
Power Train
- Forward/Reverse Gears
- 8 fwd / 6 rev
- Transmission
- direct drive, power shift
- Brakes - Service
- air actuated, multiple oil disc
- Brakes - Service - Surface Area
- 2595 in²
- Brakes - Parking
- air-actuated, multiple oil-disc
- Brakes - Secondary
- dual circuit
Hydraulic System
- Circuit Type
- closed center load sense
- Pump Type
- variable piston
- Pump Output
- 38 gpm
- Maximum System Pressure
- 3500 psi
- Reservoir Tank Capacity
- 10.04 gal (US)
- Standby Pressure
- 450 psi
Frame
- Circle - Diameter
- 60.2 in
- Circle - Blade Beam Thickness
- 1.2 in
- Drawbar - Height
- 5 in
- Front-Top/Bottom Plate - Width
- 11 in
- Front-Top/Bottom Plate - Thickness
- 0.9 in
- Front-Side Plates - Width
- 9.3 in
- Front-Side Plates - Thickness
- 0.4 in
- Front-Linear Weights - Minimum
- 90 lb/ft
- Front-Linear Weights - Maximum
- 115 lb/ft
- Front-Section Modulus - Minimum
- 99 in³
- Front-Section Modulus - Maximum
- 225 in³
- Front Axle - Height to Center
- 23.9 in
- Front Axle - Wheel Lean - Left/Right
- 18°
- Front Axle - Total Oscillation per Side
- 32°
Blade Range
- Circle Centershift - Right
- 24.7 in
- Circle Centershift - Left
- 24.6 in
- Moldboard Sideshift - Right
- 26 in
- Moldboard Sideshift - Left
- 20.6 in
- Maximum Blade Position Angle
- 90°
- Blade Tip Range - Forward
- 40°
- Blade Tip Range - Backward
- 5°
- Maximum Shoulder Reach Outside of Tires - Right
- 75.3 in
- Maximum Shoulder Reach Outside of Tires - Left
- 72.4 in
- Maximum Lift Above Ground
- 18 in
- Maximum Depth of Cut
- 30.5 in
Ripper
- Ripping Depth - Maximum
- 10.3 in
- Ripper Shank Holders
- 5
- Shank Holder Spacing - Minimum
- 21 in
- Penetration Force
- 9566 lb
- Pry-Out Force
- 5020 lb
- Machine Length Increase, Beam Raised
- 41.7 in
Scarifier
- Front, V-Type - Scarifier Shank Holders
- 11
- Front, V-Type - Scarifier Shank Holder Spacing
- 4.6 in
- Front, V-Type - Working Width
- 46.6 in
- Front, V-Type - Scarifying Depth, Maximum
- 11.5 in
- Front, Straight - Working Width
- 71 in
- Front, Straight - Scarfying Depth, Maximum
- 12.5 in
- Front, Straight - Scarifier Shank Holders
- 17
- Front, Straight - Scarifier Shank Holder Spacing
- 4.38 in
Tandems
- Height
- 17.2 in
- Width
- 6.8 in
- Sidewall Thickness - Inner
- 0.55 in
- Sidewall Thickness - Outer
- 0.63 in
- Drive Chain Pitch
- 1.75 in
- Wheel Axle Spacing
- 59.5 in
- Tandem Oscillation - Front Up
- 15°
- Tandem Oscillation - Front Down
- 25°
Dimensions
- Height - Top of Cab
- 122 in
- Height - High Profile Cab
- 131 in
- Height - No Cab
- 121 in
- Length - Counterweight to Ripper
- 396.2 in
- Width - Outside Front Tires
- 96.1 in
- Length - Front Axle to Mid Tandem
- 233 in
- Length - Front Tire to Rear of Machine
- 327.3 in
- Length - Front Axle to Moldboard
- 102.2 in
- Length - Between Tandem Axles
- 59.4 in
- Width - Outside Rear Tires
- 94.6 in
- Width - Tire Center Lines
- 80.9 in
- Height - Front Axle Center
- 23.4 in
- Height - Exhaust Stack
- 123 in
- Height - Top of Cylinders
- 115 in
- Ground Clearance - Rear Axle
- 13.8 in
Standard Equipment
-
- Electrical
-
- Alarm, back-up
- Alternator, 35 ampere, sealed
- Batteries, maintenance free, 750 CCA
- Electrical system, 24 volt
- Lights, stop and tail
- Motor, starting
- Product Link connection
-
- Operator Environment
-
- Accelerator
- Ashtray and lighter
- Coat hook
- Control console, adjustable
- Cup holder
- EMS III operator warning system
- Panel gauges inside the cab
- Hydraulic controls, load sensing
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Mounting bracket, general purpose
- Power steering, hydraulic
- ROPS cab, sound suppressed, low profile
- Seat, cloth, covered adjustable
- Seat belt, retractable 76 mm (3 in)
- Steering wheel, tilt, adjustable
- Storage area for cooler/lunchbox
- Sunscreen, front windshield
- Throttle control, electronic
- Washer / wipers, (3) front windshields
- Windows, fixed lower front
-
- Powertrain
-
- Air cleaner with dry type radial seal, service indicator, sutomatic dust ejector
- Air to air after cooler (ATAAC)
- Brakes - oil disc, four-wheel air actuated
- Demand fan
- Differential, lock-unlock
- Engine, 3126 DITA diesel with VHP, automatic derate, automatic idle control
- Fuel tank, sediment drain
- Fuel-water separator
- Lube for life pump drive shaft
- Muffler, under hood
- Parking brake - multi-disc, sealed and oil cooled
- Pre-screener
- Priming pump, fuel
- Serpentine belt, automatic tensioner
- Tandem drive
- Transmission
-
- Other Standard Equipment
-
- Antifreeze -35°C (-30°F)
- Bumper, rear, integrated, with hitch
- Clutch, circle drive slip
- Cutting edges
- Doors, engine compartment, locking
- Drawbar - 4 shoe, replaceable wear strips
- Endbits - 16mm (5/8 in) DH-2 steel, 16mm (5/8 in) mounting bolts
- Frame, articulated with safety lock
- Fuel tank, 90 gallon (340 L)
- Fueling, ground level
- Ground level engine shutdown
- Horn, air
- Link bar, 7 position
- Moldboard
- Radiator cleanout access
- SOS ports: engine, hydraulic, transmission, coolant, fuel
- Tool box
-
- Tires, Rims, & Wheels
-
- Partial allowance: 13.00-24 10PR on 9" single piece rims
Attachments
-
- Cutting Edges For 22 Mm (7/8 In) Thick Blade
-
- 203 mm x 19 mm (8 in x 3/4 in) for 3.7 m blade
- 203 mm x 19 mm (8 in x 3/4 in) for 4.1 m blade
- 203 mm x 16 mm (8 in x 5/8 in) for 3.7 m blade
- 203 mm x 16 mm (8 in x 5/8 in) for 4.1m blade
-
- Cutting Edges For 25 Mm (1 In) Thick Blade
-
- 203 mm x 19 mm (8 in x 3/4 in) for 3.7 m blade
- 203 mm x 19 mm (8 in x 3/4 in) for 4.1 m blade
-
- Extensions, Blade 610 Mm (2 Ft) Right And Left
-
- for 22 mm (7/8 in) thick blade - 114 kg (250 lb)
- for 25 mm (1 in) thick blade - 148 kg (325 lb)
-
- Lighting Systems:
-
- bar mounted, directional and headlights - 13 kg (28 lb)
- cab mounted, directional and headlights - 9 kg (20 lb)
- cab and bar mounted, directional, headlights and work lights - 22 kg (48 lb)
- cab and bar mounted, high, directional, headlights and work lights - 22 kg (48 lb)
- work lights, front and rear - 6 kg (13 lb)
- snow wing light, right - 18 kg (40 lb)
- warning light, cab or canopy mounted - 3 kg (6 lb)