986 Wheel Loader

Engine

Engine Power - ISO 14396:2002

449 hp

Engine Model

Cat® C15

Peak Power Speed

1600

Gross Power - SAE J1995:2014

456 hp

Net Power - SAE J1349:2011

373 hp

Rated Speed

2000

Rated Speed - 2,000 rpm - EEC 80/1269

373 hp

Rated Speed - 2,000 rpm - ISO 9249

373 hp

Bore

5.4 in

Stroke

6.75 in

Displacement

927 in²

Peak Torque (1,200 rpm) - SAE J1995:2014

1778 lb/ft

Torque Rise

16%

Note (1)

Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (2)

Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.

Operating Specifications

Operating Weight - Standard

97785 lb

Bucket Capacity Range

5.0-10.3 m³ (6.5-13.5 yd³)

Operating Weight - High Lift

104005 lb

Rated Payload - Standard (Quarry Face)

11 ton (US)

Rated Payload - Loose Material (Standard)

14 ton (US)

Rated Payload - High Lift (Quarry Face)

11 ton (US)

Rated Payload - Loose Material (High Lift)

12.1 ton (US)

Cat Truck Match - Standard

770/735/740/745

Cat Truck Match - High Lift

772/773

Transmission

Transmission Type

Cat planetary power shift

Forward - 1

5 mile/h

Forward - 2

8 mile/h

Direct Drive - Forward 2

8 mile/h

Direct Drive - Forward 3

14 mile/h

Direct Drive - Forward 4

24 mile/h

Reverse - 1

5 mile/h

Reverse - 2

8 mile/h

Direct Drive - Reverse 2

9 mile/h

Direct Drive - Reverse 3

16 mile/h

Direct Drive - Reverse 4

25.4 mile/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit

Load Sense

Lift/Tilt System - Pump

2 × 110 cc variable displacement

Maximum Flow at 2,165 rpm

123 gpm

Relief Valve Setting - Lift/Tilt

4050 psi

Lift Cylinder - Bore

7.5 in

Lift Cylinder - Stroke

45 in

Tilt Cylinder - Bore

6.7 in

Tilt Cylinder - Stroke

28.4 in

Hydraulic Cycle Times

Rack Back

4.5 s

Raise

9 s

Dump

3.5 s

Lower

5.2 s

Lower Float Down

4.3 s

Total Hydraulic Cycle Time

21.3 s

Hydraulic System - Steering

Steering System - Circuit

Load Sense

Steering System - Pump

Piston, variable displacement

Maximum Flow at 1,400 rpm

52 gpm

Steering Cut Off Pressure

4000 psi

Total Steering Angle

70°

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

Axles

Front

Fixed

Rear

Trunnion

Oscillation Angle

±12.5°

Oscillation Angle - Chain Arrangement

±8.5°

Brakes

Brakes

ISO 3450:2011

Operator's Cab

ROPS/FOPS

ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Service Refill Capacities

Fuel Tank

141 gal (US)

Fuel Tank - Short Lift

127 gal (US)

Cooling Systems

26 gal (US)

Crankcase

9 gal (US)

Diesel Exhaust Fluid Tank

6 gal (US)

Transmission

20 gal (US)

Axle Oil - Differentials and Final Drives - Front

49 gal (US)

Axle Oil - Differentials and Final Drives - Rear

45 gal (US)

Hydraulic System Factory Fill

87 gal (US)

Hydraulic System - Tank Only

34 gal (US)

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)

73 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

110 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

Note (3)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level (ISO 6396:2008)

74 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

73 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

110 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

Note (3)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Dimensions (Approximate) - Standard Lift Linkage

Ground to Top of ROPS

13.5 ft

Ground to Top of Exhaust Stacks

13.3 ft

Ground to Top of Hood

10.7 ft

Ground to Center of Front Axle

3.2 ft

Ground to Fuel Tank Clearance

2.3 ft

Ground to Lower Hitch Clearance

1.5 ft

Reach - Maximum Lift

7.1 ft

Clearance at Maximum Lift

10.1 ft

B-Pin Height - Maximum Lift

16.1 ft

Maximum Overall Height - Bucket Raised

22.4 ft

Rear Axle - Centerline to Bumper

10.3 ft

Wheel Base

12.5 ft

Maximum Overall Length

36.6 ft

Front Axle Centerline to Bucket Tip

13.8 ft

Note

• All dimensions are approximate.
• Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - High Lift Linkage

Ground to Top of ROPS

13.5 ft

Ground to Top of Exhaust Stacks

13.3 ft

Ground to Top of Hood

10.7 ft

Ground to Center of Front Axle

3.2 ft

Ground to Fuel Tank Clearance

2.3 ft

Ground to Lower Hitch Clearance

1.5 ft

Reach - Maximum Lift

7.4 ft

Clearance at Maximum Lift

11.6 ft

B-Pin Height - Maximum Lift

17.6 ft

Maximum Overall Height - Bucket Raised

23.9 ft

Rear Axle - Centerline to Bumper

10.3 ft

Wheel Base

12.5 ft

Maximum Overall Length

38 ft

Front Axle Centerline to Bucket Tip

15.3 ft

Note

• All dimensions are approximate.
• Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Ground to Top of ROPS

13.5 ft

Ground to Top of Exhaust Stacks

13.3 ft

Ground to Top of Hood

10.7 ft

Ground to Center of Rear Axle

3.2 ft

Ground to Fuel Tank Clearance

2.3 ft

Ground to Lower Hitch Clearance

1.5 ft

Reach at Maximum Lift

8 ft

Clearance at Maximum Lift

10.7 ft

B-Pin Height at Maximum Lift

15 ft

Maximum Overall Height, Bucket Raised

20.9 ft

Rear Axle Center Line to Bumper

10.3 ft

Wheel Base

12.5 ft

Maximum Overall Length

35 ft

Front Axle Centerline to Bucket Tip

12.2 ft

Dimensions (Approximate) - Quick Coupler and Fork

Ground to Top of ROPS

13.5 ft

Ground to Top of Exhaust Stacks

13.3 ft

Ground to Top of Hood

10.7 ft

Ground to Center of Rear Axle

3.2 ft

Ground to Fuel Tank Clearance

2.3 ft

Ground to Lower Hitch Clearance

1.5 ft

B-Pin Height at Maximum Lift

15 ft

Rear Axle Center Line to Bumper

10.3 ft

Wheel Base

12.5 ft

Maximum Overall Length

35.4 ft

Front Axle Centerline to Bucket Tip

12.6 ft