The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
Weights
Operating Weight
41554 lb
Buckets
Bucket Capacities
2.9-4.4 m³ (3.75-5.75 yd³)
Weights and Operating Specifications
Operating Weight
41554 lb
Tipping Load - Full Turn - ISO 14397-1*
24264 lb
Tipping Load - Full Turn - Rigid Tires**
25875 lb
Breakout Force
34638 lbf
Note (1)
For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
Note (2)
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (3)
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Service Refill Capacities
Fuel Tank Size
76.6 gal (US)
Cooling System
13.2 gal (US)
Crankcase
4.8 gal (US)
DEF Tank
4.2 gal (US)
Differential - Final Drives - Front
10.6 gal (US)
Differential - Final Drives - Rear
10 gal (US)
Hydraulic Tank
29.6 gal (US)
Transmission
11.9 gal (US)
Dimensions
B-Pin Height
13.75 ft
Rack Back - Maximum Lift
60 degrees
Rack Back - Carry
45 degrees
Rack Back - Ground
40 degrees
Lift Arm Clearance
12 ft
Centerline of Rear Axle to Edge of Counterweight
6.75 ft
Note
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
Height - Top of ROPS
11.33 ft
Height - Top of Exhaust Pipe
11.17 ft
Height - Top of Hood
8.75 ft
Ground Clearance
1.5 ft
Wheel Base
10.83 ft
Centerline of Rear Axle to Hitch
5.42 ft
Transmission
Forward - 1
4.5 mile/h
Forward - 2
8 mile/h
Forward - 3
14.2 mile/h
Forward - 4
22.4 mile/h
Reverse - 1
4.5 mile/h
Reverse - 2
8 mile/h
Reverse - 3
14.2 mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
Hydraulic System
Steering System - Pump Type
Piston
Hydraulic Cycle Time - Total Cycle Time
9.4 s
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)
4047 psi
Implement System - Maximum Pump Output at 2,390 rpm
68 gpm
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
109 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the "EU Directives."
Note (3)
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
107 LWA***
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
73 dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Note (1)
For machines in European Union countries and in countries that adopt the EU Directives
With Cooling Fan Speed at 70% of Maximum Value: Note (2)
European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Engine - Tier 4 Final/Stage IV
Emissions
Tier 4/Stage IV
Standard Equipment
Note
Standard and optional equipment may vary. Consult your Cat dealer for details.