160 Motor Grader
Exterior View
Please contact your nearest store for rates and other details.
Product Specs
Engine
- Net Power Range (Tier 4)
- 224 hp
- Engine Model
- Cat® C9.3
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V
- Bore
- 4.5 in
- Displacement
- 567.5 in³
- Stroke
- 5.9 in
- Number of Cylinders
- 6
- Torque Rise
- 39%
- Maximum Torque - VHP Plus
- 1000 lb/ft
- Derating Altitude
- 10000 ft
Weights
- Operating Weight - Typically Equipped
- 45547 lb
Moldboard
- Blade Width
- 14 ft
- Cutting Edge Thickness
- 0.6 in
- Cutting Edge Width
- 6 in
- End Bit - Thickness
- 0.6 in
- End Bit - Width
- 6 in
- Moldboard - Blade Width
- 14 ft
- Moldboard - Height
- 24 in
- Moldboard - Thickness
- 0.87 in
- Throat Clearance
- 6.5 in
- Blade Down Pressure - Base GVW
- 17004 lb
- Blade Down Pressure - Maximum GVW
- 29308 lb
- Blade Pull - Base GVW
- 25931 lb
- Blade Pull - Maximum GVW
- 34262 lb
- Arc Radius
- 16.3 in
Dimensions
- Height - Top of Cab
- 130 in
- Length - Counterweight to Ripper
- 399 in
- Ground Clearance - Rear Axle
- 13.3 in
Blade Range
- Maximum Lift Above Ground
- 17.8 in
- Maximum Depth of Cut
- 29.5 in
- Maximum Blade Position Angle
- 90
- Maximum Shoulder Reach Outside of Tires - Left
- 82.3 in
- Maximum Shoulder Reach Outside of Tires - Right
- 89.7 in
- Moldboard Sideshift - Left
- 20.1 in
- Moldboard Sideshift - Right
- 26 in
- Blade Tip Range - Backward
- 5
- Blade Tip Range - Forward
- 40
- Circle Centershift - Left
- 27.4 in
- Circle Centershift - Right
- 28.7 in
Frame
- Front Frame Structure - Height
- 12.6 in
- Front Frame Structure - Width
- 12 in
- Front Axle - Height to Center
- 23.5 in
- Front Axle - Total Oscillation per Side
- 32
- Front Axle - Wheel Lean - Left/Right
- 18
- Front-Top/Bottom Plate - Thickness
- 0.87 in
- Front-Top/Bottom Plate - Width
- 12 in
- Drawbar - Height
- 6 in
- Drawbar - Thickness
- 0.5 in
- Drawbar - Width
- 3 in
- Circle - Blade Beam Thickness
- 1.6 in
- Circle - Diameter
- 61.1 in
- Circle - Height
- 6.3 in
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
Power Train
- Transmission
- APECS, Direct Drive, Powershift
- Forward/Reverse Gears
- 8 Forward/6 Reverse
- Brakes - Service - Surface Area
- 3565 in²
- Brakes - Service
- Multiple Oil Disc
- Brakes - Parking
- Multiple Oil Disc
- Brakes - Secondary
- Dual Circuit Control
Service Refill
- Fuel Capacity
- 104 gal (US)
- Diesel Exhaust Fluid
- 5.8 gal (US)
- Circle Drive Housing
- 1.8 gal (US)
- Cooling System
- 15 gal (US)
- Hydraulic System - Total
- 26.4 gal (US)
- Hydraulic System - Tank
- 16.9 gal (US)
- Transmission - Differential - Final Drives
- 18.5 gal (US)
- Tandem Housing - Each
- 22.9 gal (US)
- Engine Oil
- 7.9 gal (US)
- Front Wheel Spindle Bearing Housing
- 0.13 gal (US)
Ripper
- Ripping Depth - Maximum
- 16.8 in
- Ripper Shank Holders
- 5
- Ripper Shank Holder Spacing
- 21 in
- Machine Length Increase, Beam Raised
- 40.6 in
- Penetration Force
- 20812 lb
- Pry-Out Force
- 28493 lb
Scarifier
- Mid, V-Type - Working Width
- 46.6 in
- Mid, V-Type - Scarifier Shank Holders
- 11
- Mid, V-Type - Scarifier Shank Holder Spacing
- 4.6 in
- Mid, V-Type - Scarifying Depth, Maximum
- 11.5 in
- Rear - Scarifier Shank Holders
- 9
- Rear - Scarifier Shank Holder Spacing
- 10.5 in
- Rear - Scarifying Depth, Maximum
- 16.8 in
- Rear - Working Width
- 84 in
- Front, V-Type - Working Width
- 47.4 in
- Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
- 5 or 11
- Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
- 4.6 in
- Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
- 18.4 in
- Front, V-Type, 5 or 11 Tooth - Working Width
- 40.6 in
Operating Specifications
- Top Speed - Forward
- 29.5 mile/h
- Top Speed - Reverse
- 23.3 mile/h
- Articulation Angle - Left/Right
- 20°
- Steering Range - Left/Right
- 50°
- Turning Radius - Outside Front Tires
- 25.59 ft
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Powertrain
-
- Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
- Air-to-air after cooler (ATAAC)
- Belt, serpentine, automatic tensioner
- Brakes, oil disc, four-wheel, hydraulic
- Demand fan, hydraulic, swing-out
- Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
- Differential lock/unlock, automatic
- Drain, engine oil, ecology
- Eco mode
- Electronic overspeed protection
- Engine, C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
- Fuel tank, 394 L (104 gal), ground level access and sediment drain
- Parking brake - multi-disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Tandem drive
- Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
-
- Electrical
-
- Alarm, back up
- Alternator, sealed 150 ampere
- Batteries, maintenance free, heavy duty, 1125 CCA
- Breaker panel, ground accessible
- Cab harness and electrical hydraulic valves
- Electrical system, 24V
- Grade Control Ready, cab harness, software, electrical hydraulic valves, bosses and brackets
- Lights, roof-mounted roading, reversing, LED stop, and tail
- Product Link
- Starter, electric
-
- Operator Environment
-
- Accelerator
- Air conditioning with heater
- Arm and wrist rest, electronically adjustable
- Articulation, automatic return-to-center
- Cat Messenger operator information system
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauge, machine level
- Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
- Hour meter, digital
- Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
- Joystick, adjustable armrests
- Joystick gear selection
- Joystick hydraulic power steering
- Ladders, cab, left and right side
- Lights, night time cab
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- Rollover protective Structure (ROPS) cab, sound suppressed 70 dB(A)
- Seat, cloth-covered, comfort suspension
- Seat belt, retractable 76 mm (3 in)
- Storage area for cooler/lunchbox
- Throttle control, electronic
- Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
- Windows, tempered - left and right side wipers, rear and intermittent wiper
-
- Fluids
-
- Antifreeze
- Extended lifecoolant to -35° C (-30° F)
-
- Tires, Rims, Wheels
-
- Partial allowance for tires on 254 - 607 mm (10 - 24 in) multi-piece rims is included in the base machine price and weight
-
- Other
-
- Accumulators, brake, dual certified
- Anti-glare paint
- Bumper, rear, integrated with hitch
- CD ROM parts book
- Clutch, circle drive slip
- Cutting edges: - 152 16 mm (6 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
- Doors (3), engine compartment, locking
- Drawbar, 6 shoes, replaceable wear strips
- Electrical hydraulic valves, hydraulic lines for base 8 functions
- Endbits, - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
- Fluid check, ground level
- Frame, articulated, with safety lock
- Engine shutdown, ground level
- Hammer (emergency exit)
- Horn, electric
- Hydraulic lines for base functions
- Lockout, hydraulic implement (for roading and servicing)
- Moldboard
- Mounting, cab roof accessories
- Pump, hydraulic, high capacity
- Radiator, cleanout access (both sides with swing doors)
- Secondary steering
- Serviceability, left side
- (S·O·SSM) ports: engine, hydraulic, transmission, coolant, fuel
- Tandem walkway/guards
- Tool box
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alternator, 280 ampere
- Batteries, extreme duty, 1,400 CCA
- Lights, high headlights
- Lights, low headlights
- Lights, working lights, basic
- Lights, working lights, plus, LED
- Lights warning, beacon or strobe
- Lights, mounting for warning light
-
- Guards
-
- Articulation guard
- Fenders, front
- Fenders, rear
- Front axle guard
- Sound suppression (bottom)
- Sound suppression (enclosure)
- Transmission
-
- Operator Environment
-
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Comfort plus arrangement
- Comfort premium arrangement
-
- Powertrain
-
- All-wheel drive
- Precleaner, snow
- Starter, extreme duty, 1,000 amps
- Transmission, autoshift
-
- Other
-
- Attachment Ready Option (ARO)
- Integrated cross slope
- Accumulators, blade lift
- Camera, rearview
- Drain, ecology, engine Wiggins
- Heater, engine coolant: 120V
- Heater, engine coolant: 240V
- Hydraulic arrangements with one or more additional hydraulic valves available for rear ripper, dozer, snow plow and snow wing
- Snow wing mounting, frame ready
- Starting aid, ether
- Reversing fan, automatic or manual
- Cat Grade with 3D
-
- Attachments
-
- Blade extension, left, 610 mm (2 ft)
- Blade extension, right hand, 610 mm (2 ft)
- Counterweight
- Cutting edges, curved
- Endbits, overlay
- Front lift group, mounting
- Front lift group, mechanical
- Grader bit, narrow and super penetration
- Mid-mount scarifier, package
- Moldboard: 4267 mm x 610 mm x 22 mm (14 ft x 24 in x 7/8 in)
- Moldboard: 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in)
- Moldboard: 4877 mm x 686 mm x 25 mm (16 ft x 27 in x 1 in)
- Push plate
- Ripper, rear
- Ripper tooth
- Scarifier, front
- Snow arrangement
- Snow wing ready package
- Tow hitch