(317) 545-2151

301.5 Mini Hydraulic Excavator

Request a Quote
Download a Product Brochure

Product Specs

Engine

Net Power
21 hp
Engine Model
C1.1
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC
21 hp
Gross Power - ISO 14396
21.6 hp
Bore
3 in
Stroke
3.2 in
Displacement
69 in³
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (2)
Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Note (1)
Engine power is tested per ISO 14396:2002.

Weights

Operating Weight
3913 lb
Minimum Operating Weight with Canopy*
3483 lb
Maximum Operating Weight with Canopy**
3913 lb
EU: CE Plate Weight***
3836 lb
Note (1)
*Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.

Dimensions - Long Stick

Dig Depth
100 in
Vertical Wall
74.4 in
Maximum Reach - Ground Level
153.1 in
Maximum Reach
155.9 in
Maximum Dig Height
137.4 in
Maximum Dump Clearance
98.8 in
Boom In Reach
57.1 in
Tail Swing
32.3 in
Maximum Blade Height
10.8 in
Maximum Blade Depth
10.2 in
Boom Height - Shipping Position
40.9 in
O/A Shipping Height
90.9 in
Swing Bearing - Height
17.5 in
O/A Undercarriage Length
57.5 in
Overall Shipping Length*
141.3 in
Boom Swing - Right
50 °
Boom Swing - Left
65 °
Track Belt/Shoe Width
9.1 in
Track Width - Retracted
39 in
Track Width - Expanded
51.18 in
Minimum Ground Clearance Below Undercarriage
6.1 in
Stick Length
45.7 in
Note
*Overall Shipping Length depends on blade position during shipment.

Dimensions - Standard Stick

Dig Depth
92.1 in
Vertical Wall
70.9 in
Maximum Reach - Ground Level
146.9 in
Maximum Reach
149.6 in
Maximum Dig Height
135 in
Maximum Dump Clearance
96.5 in
Boom In Reach
57.5 in
Tail Swing
32.3 in
Maximum Blade Height
10.8 in
Maximum Blade Depth
10.2 in
Boom Height - Shipping Position
42.9 in
O/A Shipping Height
90.9 in
Swing Bearing - Height
17.5 in
O/A Undercarriage Length
57.5 in
Overall Shipping Length*
142.5 in
Boom Swing - Right
50 °
Boom Swing - Left
65 °
Track Belt/Shoe Width
9.1 in
Track Width - Retracted
39 in
Track Width - Expanded
51.18 in
Minimum Ground Clearance Below Undercarriage
6.1 in
Stick Length
37.8 in
Note
*Overall Shipping Length depends on blade position during shipment.

Service Refill Capacities

Cooling System
1 gal (US)
Engine Oil
1.2 gal (US)
Fuel Tank
5.8 gal (US)
Hydraulic Tank
4.8 gal (US)
Hydraulic System
6.9 gal (US)

Swing System

Machine Swing Speed
9.8 r/min

Blade

Width*
39 in
Height
8.9 in
Note
*Expanded – 1300 mm (51 in)

Travel System

Travel Speed - High
2.7 mile/h
Travel Speed - Low
1.8 mile/h
Maximum Traction Force - High Speed
2315.5 lbf
Maximum Traction Force - Low Speed
3597 lbf
Ground Pressure - Minimum Weight
4 psi
Ground Pressure - Maximum Weight
4.4 psi
Gradeability - Maximum
30 degrees

Weight Increase from Minimum Configuration

Long Stick
18 lb
Steel Tracks
126 lb
Expandable Undercarriage
284 lb

Sustainability

Recyclability
95%

Sound

Operator Sound Pressure (ISO 6396:2008)
72 dB(A)
Note
European Union Directive “2000/14/EC”
Average Exterior Sound Pressure (ISO 6395:2008)
93 dB(A)

Hydraulic System

Pump Flow at 2,400 rpm
17.4 gpm
Operating Pressure - Equipment
3089.3 psi
Operating Pressure - Travel
3089.3 psi
Operating Pressure - Swing
1493.9 psi
Auxiliary Circuit - Primary - Flow
8.7 gpm
Auxiliary Circuit - Primary - Pressure
3089.3 psi
Auxiliary Circuit - Secondary - Flow
3.7 gpm
Auxiliary Circuit - Secondary - Pressure
3089.3 psi
Digging Force - Stick - Standard
1843.4 lbf
Digging Force - Stick - Long
1616.4 lbf
Digging Force - Bucket
3169.8 lbf
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump

Certification - Canopy

Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Top Guard
ISO 10262:1998 (Level I)

Standard Equipment

  • Engine
    • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Two Speed Travel
    • Fuel Water Separator
    • Power on Demand (not available in all regions)
    • Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
  • Hydraulics
    • Smart Tech Electronic Pump
    • Accumulator
    • Automatic Swing Brake
    • Auxiliary Hydraulic Lines
    • One and Two Way Auxiliary Flow
    • Continuous Auxiliary Flow
    • Auxiliary Line Quick Disconnects
  • Operator Environment
    • Tilt-up Canopy
    • Top Guard ISO 10262:1998 Level I
    • ROPS – ISO 12117-2:2008
    • TOPS – ISO 12117:1997
    • Machine 2-Point Lifting
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer (optional in some regions)
    • Adjustable Wrist Rests
    • Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Machine Security
    • Machine Security – Standard Key with Pass Code
    • Vinyl Non-Suspension Seat
    • Hydraulic Lockout – All Controls
    • Retractable High Visibility Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • Storage Pocket
    • Skylight
    • Mounting Bosses for Front
    • Signaling/Warning Horn
    • Boom Light, Halogen
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Hour Meter with Wake Up Switch
  • Undercarriage
    • Rubber Belt (230 mm/9 in wide)
    • Dozer Blade
    • Dozer Blade Float
    • Hydraulic Track Adjusters
    • Tie Downs on Track Frame
  • Boom, Stick And Linkages
    • One Piece Boom (1780 mm/70 in)
    • Standard Stick (960 mm/37.8 in)
    • Front Shovel Capable
    • Front Shovel Capable – Pin-On
    • Thumb Ready (not available in all regions)
    • Certified Lifting Eye (optional in some regions)
  • Electrical
    • 12 Volt Battery
    • Software (machine and monitor)
    • Maintenance Free Battery
    • Signaling/Warning Horn
    • 12 Volt Power Socket

Attachments

  • Operator Environment
    • Control Pattern Changer (optional in some regions)
    • No Travel Pedals and Hand Levers
    • Machine Security – Push to Start with Key Fob/Pass Code
    • Vinyl Suspension Seat
    • LED Front Lights
    • LED Front and Rear Lights
    • LED Boom Light
    • Mirrors Left and Right
  • Undercarriage
    • Steel Track (230 mm/9 in wide)
    • Expandable Undercarriage
  • Boom, Stick And Linkages
    • Long Stick (1160 mm/45.7 in)
    • Front Shovel Capable – Dual Lock Manual Coupler
    • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Hydraulic Quick Coupler Lines (not available in all regions)
  • Electrical
    • Lock Out/Tag Out Battery Disconnect
    • Product Link PL243 (regulations apply)
    • Product Link PLE643 (regulations apply)
    • Travel Alarm (standard in some regions)
  • Guarding
    • Guard, Canopy
    • Guard, Mesh
  • Other
    • Bio Oil Capable
    • Eco Drain
    • Water Jacket Heater

Pin It on Pinterest

Share This