Product Specs
Engine
- Net Power - ISO 9249/SAE J1349
- 286 hp
- Engine Model
- Cat C13
- Emissions
- U.S. EPA Tier 4 Final / EU Stage V emissions standards
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
- Note (2)
- Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Weights
- Operating Weight - Typically Equipped
- 57250 lb
- Note
- *Typically equipped includes 20.5R25 tires, 90 kg operator, and full fluids.
Moldboard
- Blade Width
- 14 ft
Power Train
- Transmission
- Direct Drive Powershift, Countershift
- Forward/Reverse Gears
- 8 Forward / 6 Reverse
Service Refill Capacities
- Fuel Tank
- 110 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta
Sustainability
- Recyclability
- 96%
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Joystick, power adjustable armrests
- Air conditioner with heater
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
- Gauges, machine level
- Message display
- Joystick gear selection
- Joystick hydraulic controls for implements, steering, transmission
- Ladders, cab, left and right side
- Lights, left and right side lights
- Lights, night time cab, LED
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- ROPS cab
- Seat, mechanical suspension, cloth
- Storage compartments
- Throttle control, electronic
-
- Powertrain
-
- Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
- Articulation, automatic return-to-center
- Air-to-Air After Cooler (ATAAC)
- Auto differential Lock
- Brake wear indication
- Brakes, oil disc, four-wheel, hydraulic
- Consistent power to ground
- Monitoring system
- Clutch, circle drive slip
- Differential, lock/unlock*
- Drain, engine oil, ecology
- Demand fan, hydraulic
- Eco mode
- Fuel tank, ground level
- Fuel-water separator
- Hydraulic demand fan
- Optimized VHP
- Parking brake, multi disc, sealed, oil-cooled
- Priming pump, fuel
- Sediment drain, fuel tank
- Transmission, 8F/6R, power shift, direct drive
-
- Electrical
-
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, HD, 1,125 CCA
- Breaker panel
- Electrical system, 24V*
- Belt, serpentine, automatic tensioner
- Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
- Starter, electric
- Service lights, enclosure, rear, LED
-
- Safety
-
- Alarm, back up
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Lockout, hydraulic implement for roading
- Operator Not Present Monitoring system
- Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
- Seat belt, retractable 76 mm (3 in)
- Secondary steering
- Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Air horn
- Heated door
- Mirrors high visibility
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Seat, heated
- Seat, heated/ventilated
- Rearview camera
- Seat belt indicator
-
- Powertrain
-
- Transmission, autoshift
- Engine, compression brake
-
- Technology
-
- Cat® Grade 3D Ready with Cross Slope
- Stable Blade
- Advanced control joysticks
- Auto articulation
-
- Guards
-
- Debris guard
- Front axle cylinder guards
- Rear fenders
- Sound suppression, engine enclosure and transmission
- Transmission guard
- Accumulators, blade lift
- Metallic DCM wear strips
-
- Electrical
-
- Light, LED, warning strobe
- Lights, front headlights high
- Lights, front headlights low
- Mounting, for warning light
- Working lights halogen
- Working lights LED
-
- Safety
-
- Additional rearview camera and monitor
- Machine security system key
-
- Attachments
-
- Moldboard, 4.9 m (16 ft)
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
- Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
- Snow wing, mounting frame ready
- Fast fill
- 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
- Push block, counterweight
- Ripper, rear
- Tooth, ripper
-
- Fluids
-
- Coolant, -51 degrees C (-60 degrees F)