Home / Equipment / Caterpillar Machines / Wheel Loaders / IT38G Series II Integrated Toolcarrier
Caterpillar IT38G Series II Integrated Toolcarrier
Caterpillar IT38G Series II Integrated ToolcarrierImproved visibility and increased static tipping loads provide unmatched performance and versatility. |  |  | |||
| |||||
 | Overview & Specifications | |  | Features & Benefits | | | Standard Equipment | | | Optional Equipment | | | Work Tools & Attachments | ||
| |||||||||||||||
| Engine | |
| |
| Net Power - ISO 9249 | 180 hp / 134 kW |
| |
| Engine Model | CatŪ 3126B ATAAC |
| |
| Flywheel Power | 160 hp / 119 kW |
| |
| Max. Flywheel Power | 180 hp / 134 kW |
| |
| Peak Torque (Net) @ 1,400 RPM | 619 ft-lb / 839 N·m |
| |
| Total Torque Rise | 62 % / 62 % |
| |
| Bore | 4.3 in / 110 mm |
| |
| Stroke | 5 in / 127 mm |
| |
| Displacement | 439 in3 / 7.2 L |
| |
| Weights | |
| |
| Operating Weight | 32156 lb / 14583 kg |
| |
| Transmission | |
| |
| Forward 1 | 4.7 mph / 7.6 km/h |
| |
| Forward 2 | 8.3 mph / 13.4 km/h |
| |
| Forward 3 | 14.5 mph / 23.3 km/h |
| |
| Forward 4 | 24.1 mph / 38.8 km/h |
| |
| Reverse 1 | 4.7 mph / 7.6 km/h |
| |
| Reverse 2 | 8.3 mph / 13.4 km/h |
| |
| Reverse 3 | 14.5 mph / 23.3 km/h |
| |
| Axles | |
| |
| Front | Fixed front |
| |
| Rear | Oscillating +/- 12° |
| |
| Maximum Single-Wheel Rise and Fall | 16.5 in / 420 mm |
| |
| Hydraulic System | |
| |
| Bucket/Work Tool System - Pump Output | 43 gal/min / 163 L/min |
| |
| Bucket/Work Tool System - Relief Valve Setting | 3597 psi / 24800 kPa |
| |
| Hydraulic Cycle Time - Raise | 5.8 Seconds / 5.8 Seconds |
| |
| Hydraulic Cycle Time - Dump | 2 Seconds / 2 Seconds |
| |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.9 Seconds / 2.9 Seconds |
| |
| Hydraulic Cycle Time - Total | 10.7 Seconds / 10.7 Seconds |
| |
| Pilot System - Pump Output | 26.9 gal/min / 102 L/min |
| |
| Service Refill Capacities | |
| |
| Fuel Tank - Standard | 67.9 gal / 257 L |
| |
| Cooling System | 11.4 gal / 43 L |
| |
| Crankcase | 7.9 gal / 30 L |
| |
| Transmission | 7.9 gal / 30 L |
| |
| Differentials and Final Drives - Front | 6.3 gal / 24 L |
| |
| Differentials and Final Drives - Rear | 7.1 gal / 27 L |
| |
| Hydraulic System (Including Tank) | 23.8 gal / 90 L |
| |
| Hydraulic Tank | 20.1 gal / 76 L |
| |
| Buckets | |
| |
| Bucket Capacities | 2.21-2.8 m3 2.75-3.5 yd3 |
| |
| Max Bucket Capacity | 3.5 yd3 / 2.8 m3 |
| |
| Operating Specifications | |
| |
| Static Tipping Load, Full Turn | 19106 lb / 8665 kg |
| |
| Breakout Force | 24750 lb / 110 kN |
| |
| Dimensions | |
| |
| Height to top of ROPS | 10.83 ft / 3300 mm |
| |
| Height to top of exhaust pipe | 10.59 ft / 3227 mm |
| |
| Height to top of hood | 7.74 ft / 2359 mm |
| |
| Ground clearance | 1.31 ft / 399 mm |
| |
| B-pin height - standard | 13.32 ft / 4061 mm |
| |
| Center line rear axle to edge of counterweight | 6.09 ft / 1857 mm |
| |
| Wheelbase | 9.91 ft / 3020 mm |
| |
| Center line rear axle to hitch | 4.95 ft / 1510 mm |
| |