Home / Equipment / Caterpillar Machines / Motor Graders / 140H Global Motor Grader
Caterpillar 140H Global Motor Grader
Caterpillar 140H Global Motor GraderThe 140H blends productivity and durability to give you the best return on your investment. |  |  |
|
|
|
| Base Power (all gears) Net | 165 hp / 123 kW |
|
| VHP - gears 1-3 Net | 165 hp / 123 kW |
|
| VHP - gears 4-8 Net | 185 hp / 138 kW |
|
| VHP Plus - gears 1-3 Net | 165 hp / 123 kW |
|
| VHP Plus - gears 4-6 Net | 185 hp / 138 kW |
|
| VHP Plus - gears 7-8 Net | 205 hp / 153 kW |
|
| Base Power (all gears) Gross | 182 hp / 136 kW |
|
| VHP - gears 1-3 Gross | 182 hp / 136 kW |
|
| VHP - gears 4-8 Gross | 202 hp / 151 kW |
|
| VHP Plus - gears 1-3 Gross | 182 hp / 136 kW |
|
| VHP Plus - gears 4-6 Gross | 202 hp / 151 kW |
|
| VHP Plus - gears 7-8 Gross | 222 hp / 166 kW |
|
| Engine Model | CatŪ 3176C DITA ATAAC VHP |
|
| Displacement | 629 in3 / 10.3 L |
|
| Bore | 4.9 in / 125 mm |
|
| Stroke | 5.5 in / 140 mm |
|
| Speed @ rated power | 2000 RPM |
|
| Number of cylinders | 6 |
|
| Derating altitude | 10000 ft / 3048 m |
|
| Derating altitude | 3050 |
|
| Std - Fan speed - max | 1210 RPM |
|
| Hi Ambient - Fan speed - max | 1300 RPM |
|
| Hi Ambient - Fan speed - min | 500 RPM |
|
|
|
| Gross Vehicle Weight - base | 32357 lb / 14677 kg |
|
| Gross Vehicle Weight, max | 46872 lb / 21261 kg |
|
| Gross Vehicle Wt, max - front axle | 16733 lb / 7590 kg |
|
| Gross Vehicle Wt, max - rear axle | 30139 lb / 13671 kg |
|
| Gross Vehicle Wt, base - front axle | 9123 lb / 4138 kg |
|
| Gross Vehicle Wt, base - rear axle | 23234 lb / 10539 kg |
|
|
|
| Blade width | 12 ft / 3.658 m |
|
| Moldboard - height | 24 in / 610 mm |
|
| Moldboard - thickness | .87 in / 22 mm |
|
| Arc radius | 16.25 in / 413 mm |
|
| Throat clearance | 4.7 in / 120 mm |
|
| Cutting edge - width | 6 in / 152 mm |
|
| Cutting edge - thickness | .63 in / 16 mm |
|
| End Bit - width | 6 in / 152 mm |
|
| End Bit - thickness | .63 in / 16 mm |
|
| Blade Pull - base GVW | 29121 lb / 13209 kg |
|
| Blade Pull - max GVW | 42184 lb / 19135 kg |
|
| Down Pressure - base GVW | 15648 lb / 7098 kg |
|
| Down Pressure - max GVW | 28698 lb / 13017 kg |
|
|
|
| Top Speed - Fwd. | 27.4 mph / 44 km/h |
|
| Top Speed - Rev. | 21.6 mph / 34.7 km/h |
|
| Turning radius, outside front tires | 24.6 ft / 7.5 m |
|
| Steering range - left/right | 50° |
|
| Articulation angle - left/right | 20° |
|
| Fwd. 1st | 2.3 mph / 3.8 km/h |
|
| Fwd. 2nd | 3.2 mph / 5.1 km/h |
|
| Fwd. 3rd | 4.6 mph / 7.4 km/h |
|
| Fwd. 4th | 6.4 mph / 10.3 km/h |
|
| Fwd. 5th | 10 mph / 16.2 km/h |
|
| Fwd. 6th | 13.7 mph / 22 km/h |
|
| Fwd. 7th | 18.8 mph / 30.3 km/h |
|
| Fwd. 8th | 27.4 mph / 44 km/h |
|
| Rev. 1st | 1.8 mph / 3 km/h |
|
| Rev. 2nd | 3.5 mph / 5.6 km/h |
|
| Rev. 3rd | 5 mph / 8.1 km/h |
|
| Rev. 4th | 7.9 mph / 12.8 km/h |
|
| Rev. 5th | 14.8 mph / 23.9 km/h |
|
| Rev. 6th | 21.6 mph / 34.7 km/h |
|
|
|
| Fuel Capacity | 105 gal / 397 L |
|
| Cooling system | 10 gal / 38 L |
|
| Hydraulic system - total | 20.8 gal / 80 L |
|
| Hydraulic system - tank | 9.9 gal / 38 L |
|
| Engine Oil | 10.2 gal / 39 L |
|
| Trans./Diff./Final Drives | 12.4 gal / 47 L |
|
| Tandem housing (each) | 16.9 gal / 64 L |
|
| Front wheel spindle bearing housing | .13 gal / .5 L |
|
| Circle drive housing | 1.8 gal / 7 L |
|
|
|
| Forward/Reverse Gears | 8 fwd / 6 rev |
|
| Transmission | Direct drive, power shift |
|
| Brakes - Service | air-actuated, oil-disc |
|
| Brakes - Service, surface area | 3712 in2 / 23948 cm2 |
|
| Brakes - Parking | manual, multiple oil-disc |
|
| Brakes - Secondary | air actuated, oil-disc |
|
|
|
| Circuit type | Closed center load sense |
|
| Pump type | axial piston |
|
| Pump output | 54.4 gal/min / 206 L/min |
|
| Maximum system pressure | 3500 psi / 24150 kPa |
|
| Reservoir tank capacity | 9.9 gal / 38 L |
|
| Standby Pressure | 450 psi / 3100 kPa |
|
|
|
| Circle - diameter | 60.2 in / 1530 mm |
|
| Circle - blade beam thickness | 1.2 in / 30 mm |
|
| Drawbar - height | 5 in / 127 mm |
|
| Front-top/bottom plate - width | 12 in / 305 mm |
|
| Front-top/bottom plate - thickness | 1 in / 25 mm |
|
| Front-side plates - width | 9.5 in / 241 mm |
|
| Front-side plates - thickness | .5 in / 12 mm |
|
| Front-linear weights - min | 112 lb/ft / 165 kg/m |
|
| Front-linear weights - max | 144 lb/ft / 213 kg/m |
|
| Front-section modulus - min | 291 in3 / 4785 cm3 |
|
| Front-section modulus - max | 127 in3 / 2083 cm3 |
|
| Front axle - height to center | 625 |
|
| Front axle - height to center | 24.6 in / 625 mm |
|
| Front axle - wheel lean, left/right | 18° |
|
| Front axle - total oscillation per side | 32° |
|
|
|
| Circle centershift - right | 28.7 in / 728 mm |
|
| Circle centershift - left | 27.4 in / 695 mm |
|
| Moldboard sideshift - right | 26 in / 660 mm |
|
| Moldboard sideshift - left | 20.6 in / 524 mm |
|
| Maximum blade position angle | 90° |
|
| Blade tip range - forward | 40° |
|
| Blade tip range - backward | 5° |
|
| Maximum shoulder reach outside of tires - right | 77.9 in / 1978 mm |
|
| Maximum shoulder reach outside of tires - left | 74.6 in / 1896 mm |
|
| Maximum lift above ground | 18.9 in / 480 mm |
|
| Maximum depth of cut | 28.1 in / 715 mm |
|
|
|
| Ripping depth, maximum | 18.2 in / 462 mm |
|
| Ripper shank holders | 5 |
|
| Shank holder spacing - min | 21 in / 533 mm |
|
| Penetration force | 17740 lb / 8047 kg |
|
| Pryout force | 20460 lb / 9281 kg |
|
| Machine length increase, beam raised | 38.2 in / 970 mm |
|
|
|
| Front, straight: Working width | 71 in / 1800 mm |
|
| Front, straight: Scarfying depth, maximum | 12.5 in / 317 mm |
|
| Front, straight: Scarifier shank holders | 17 |
|
| Front, straight: Scarifier shank holder spacing | 4.38 in / 111 mm |
|
| Rear: Working width | 91 in / 2300 mm |
|
| Rear: Scarifier shank holders | 9 |
|
| Rear: Scarifier shank holder spacing | 10.5 in / 267 mm |
|
|
|
| Height | 19.9 in / 506 mm |
|
| Width | 7.9 in / 201 mm |
|
| Sidewall thickness - inner | .63 in / 16 mm |
|
| Sidewall thickness - outer | .71 in / 18 mm |
|
| Drive chain pitch | 2 in / 51 mm |
|
| Wheel axle spacing | 60 in / 1522 mm |
|
| Tandem oscillation - front up | 15° |
|
| Tandem oscillation - front down | 25° |
|
|
|
| Height - top of cab | 123 in / 3131 mm |
|
| Height - high profile cab | 132 in / 3356 mm |
|
| Height - no cab | 122.2 in / 3103 mm |
|
| Length - counterweight to ripper | 398 in / 10097 mm |
|
| Width - outside front tires | 97 in / 2464 mm |
|
| Length - front axle to mid tandem | 242.9 in / 6169 mm |
|
| Length - front tire to rear of machine | 343 in / 8713 mm |
|
| Length - front axle to moldboard | 100.8 in / 2561 mm |
|
| Length - between tandem axles | 60 in / 1523 mm |
|
| Width - outside rear tires | 96.2 in / 2443 mm |
|
| Width - tire center lines | 81.8 in / 2077 mm |
|
| Height - front axle center | 23.6 in / 600 mm |
|
| Height to exhaust stack | 122.2 in / 3103 mm |
|
| Height to top of cylinders | 119.2 in / 3028 mm |
|
| Ground clearance at rear axle | 13.5 in / 344 mm |
|
