Home / Equipment / Caterpillar Machines / Motor Graders / 16H Motor Grader
Caterpillar 16H Motor Grader
Caterpillar 16H Motor GraderThe 16H blends productivity and durability to give you the best return on your investment. |  |  |
|
|
| Base Power (all gears) Net | 265 hp / 198 kW |
|
| VHP - gears 1-3 Net | 265 hp / 198 kW |
|
| VHP - gears 4-8 Net | 285 hp / 213 kW |
|
| Engine Model | CatŪ 3196 ETA |
|
| Base Power (all gears) Gross | 279 hp / 208 kW |
|
| VHP - gears 1-3 Gross | 279 hp / 208 kW |
|
| VHP - gears 4-8 Gross | 299 hp / 223 kW |
|
| Displacement | 726 in3 / 11.9 L |
|
| Bore | 5.1 in / 130 mm |
|
| Stroke | 5.9 in / 150 mm |
|
| Torque Rise | 50% |
|
| Max torque | 1143 ft-lb / 1550 N·m |
|
| Speed @ rated power | 2000 RPM / 2000 RPM |
|
| Number of cylinders | 6 |
|
| Derating altitude | 11000 ft / 3353 m |
|
| Std - Fan speed - max | 1350 RPM / 1350 RPM |
|
| Std - Fan speed - min | 500 RPM / 500 RPM |
|
| Std - Ambient Capability | 117 ° F / 47 ° C |
|
| Hi Ambient - Fan speed - max | 1470 RPM / 1470 RPM |
|
| Hi Ambient - Fan speed - min | 500 RPM / 500 RPM |
|
| Hi - Ambient Capability | 122 ° F / 50 ° C |
|
|
|
| Gross Vehicle Weight - base | 54550 lb / 24740 kg |
|
| Gross Vehicle Weight - base, front axle | 15397 lb / 6982 kg |
|
| Gross Vehicle Weight - base, rear axle | 39153 lb / 17758 kg |
|
| Gross Vehicle Weight - max | 69648 lb / 31592 kg |
|
| Gross Vehicle Weight - max, front axle | 19502 lb / 8846 kg |
|
| Gross Vehicle Weight - max, rear axle | 50146 lb / 22746 kg |
|
|
|
| Blade Width | 16 ft / 4.877 m |
|
| Moldboard Height | 31 in / 787 mm |
|
| Thickness | 1 in / 25 mm |
|
| Arc radius | 16.25 in / 413 mm |
|
| Throat clearance | 4.8 in / 122 mm |
|
| Cutting edge - width | 8 in / 203 mm |
|
| Cutting edge - thickness | 1 in / 25 mm |
|
| End Bit - width | 6 in / 152 mm |
|
| End Bit - thickness | .75 in / 19 mm |
|
| Blade pull - max GVW | 45131 lb / 20471 kg |
|
| Blade pull - base GVW | 34857 lb / 15811 kg |
|
| Down pressure - max GVW | 34892 lb / 15831 kg |
|
| Down pressure - base GVW | 28301 lb / 12841 kg |
|
|
|
| Top Speed - Forward | 29.9 mph / 48.1 km/h |
|
| Top Speed - Reverse | 28.4 mph / 45.7 km/h |
|
| Turning Radius (outside front tires) | 27 ft / 8.2 m |
|
| Steering range - left/right | 50° |
|
| Articulation Angle - left/right | 20° |
|
| Fwd. 1st | 2.3 mph / 4.2 km/h |
|
| Fwd. 2nd | 3.7 mph / 5.9 km/h |
|
| Fwd. 3rd | 5 mph / 8 km/h |
|
| Fwd. 4th | 7.2 mph / 11.6 km/h |
|
| Fwd. 5th | 10.9 mph / 17.5 km/h |
|
| Fwd. 6th | 15.3 mph / 24.6 km/h |
|
| Fwd. 7th | 20.7 mph / 33.2 km/h |
|
| Fwd. 8th | 29.9 mph / 48.1 km/h |
|
| Rev. 1st | 2.5 mph / 4.6 km/h |
|
| Rev. 2nd | 3.5 mph / 5.6 km/h |
|
| Rev. 3rd | 4.7 mph / 7.6 km/h |
|
| Rev. 4th | 6.8 mph / 11 km/h |
|
| Rev. 5th | 10.3 mph / 16.6 km/h |
|
| Rev. 6th | 14.5 mph / 23.3 km/h |
|
| Rev. 7th | 19.6 mph / 31.6 km/h |
|
| Rev. 8th | 28.4 mph / 45.7 km/h |
|
|
|
| Fuel Capacity | 130 gal / 492 L |
|
| Cooling System | 12.3 gal / 46.5 L |
|
| Hydraulic system - total | 34 gal / 129 L |
|
| Hydraulic system - tank | 14.5 gal / 55 L |
|
| Engine Oil | 9.2 gal / 35 L |
|
| Differential / Final Drives | 30.1 gal / 114 L |
|
| Tandem housing (each) | 31.5 gal / 121 L |
|
| Circle drive housing | 2.1 gal / 8 L |
|
| Front wheel spindle bearing housing | .24 gal / .9 L |
|
|
|
| Forward/Reverse Gears | 8 fwd / 8 rev |
|
| Transmission | Direct drive, power shift, planetary |
|
| Brakes - service | air-actuated, oil-disc |
|
| Brakes - service, surface area | 6544 in2 / 42209 cm2 |
|
| Brakes - parking | manual, multiple oil-disc |
|
| Brakes - secondary | air-actuated, oil-disc |
|
|
|
| Circuit type | Closed center load sense |
|
| Pump type | axial piston |
|
| Pump output | 66 gal/min / 254 L/min |
|
| Maximum system pressure | 3500 psi / 24150 kPa |
|
| Reservoir tank capacity | 14.53 gal / 55 L |
|
| Standby Pressure | 450 psi / 3100 kPa |
|
|
|
| Circle - diameter | 71.75 in / 1822 mm |
|
| Drawbar - height | 6.5 in / 165 mm |
|
| Drawbar - thickness | 3.5 in / 89 mm |
|
| Front-top/bottom plate - width | 14 in / 356 mm |
|
| Front-top/bottom plate - thickness | 1.14 in / 29 mm |
|
| Front-side plates - width | 12.75 in / 324 mm |
|
| Front-side plates - thickness | .55 in / 14 mm |
|
| Front-linear weights - min | 155 lb/ft / 231 kg/m |
|
| Front-linear weights - max | 202 lb/ft / 301 kg/m |
|
| Front-section modulus - min | 228 in3 / 3746 cm3 |
|
| Front-section modulus - max | 491 in3 / 8057 cm3 |
|
| Front axle - ground clearance | 26 in / 660 mm |
|
| Front axle - front wheel lean | 18° |
|
| Front axle - oscillation angle | 32° |
|
| Circle - blade beam thickness | 1.97 in / 50 mm |
|
|
|
| Circle centershift - right | 22 in / 560 mm |
|
| Circle centershift - left | 27.2 in / 690 mm |
|
| Moldboard sideshift - right | 31.1 in / 790 mm |
|
| Moldboard sideshift - left | 25.6 in / 650 mm |
|
| Maximum blade position angle | 90° |
|
| Blade tip range (forward) | 40° |
|
| Blade tip range (backward) | 5° |
|
| Maximum shoulder reach outside of tires - right | 91 in / 2311 mm |
|
| Maximum shoulder reach outside of tires - left | 91 in / 2311 mm |
|
| Maximum lift above ground | 16.5 in / 419 mm |
|
| Maximum depth of cut | 18.5 in / 470 mm |
|
|
|
| Ripping depth, maximum | 17.8 in / 452 mm |
|
| Ripper shank holders | 7 |
|
| Ripper shank holder spacing - max | 20 in / 500 mm |
|
| Ripper shank holder spacing - min | 17.5 in / 445 mm |
|
| Penetration force | 22410 lb / 10163 kg |
|
| Pryout force | 33788 lb / 15323 kg |
|
| Machine length increase, beam raised | 63.4 in / 1610 mm |
|
|
|
| Height | 25.5 in / 648 mm |
|
| Width | 9.3 in / 236 mm |
|
| Sidewall thickness - inner | .87 in / 22 mm |
|
| Sidewall thickness - outer | .87 in / 22 mm |
|
| Drive chain pitch | 2.5 in / 63 mm |
|
| Wheel axle spacing | 72 in / 1840 mm |
|
| Tandem oscillation - forward | 15° |
|
| Tandem oscillation - reverse | 25° |
|
|
|
| Height - low profile cab | 139 in / 3524 mm |
|
| Height - high profile cab | 148 in / 3749 mm |
|
| Height - no cab | 132 in / 3359 mm |
|
| Height to axle | 28.8 in / 732 mm |
|
| Height to exhaust stack | 132 in / 3359 mm |
|
| Height to top of cylinders | 122 in / 3111 mm |
|
| Ground clearance at trans. case | 16.1 in / 409 mm |
|
| Length - front tire to end of rear frame | 393 in / 9994 mm |
|
| Length - counterweight to ripper | 458 in / 11623 mm |
|
| Length - front axle to moldboard | 121 in / 3071 mm |
|
| Length - front axle to mid tandem | 274 in / 6960 mm |
|
| Length - between tandem axles | 72 in / 1841 mm |
|
| Width - tire centerlines | 97 in / 2470 mm |
|
| Width - outside rear tires | 118 in / 2986 mm |
|
| Width - outside front tires | 121 in / 3077 mm |
|
