Home / Equipment / Caterpillar Machines / Motor Graders / 163H Motor Grader
Caterpillar 163H Motor Grader
Caterpillar 163H Motor GraderThe 163H blends productivity and durability to give you the best return on your investment. |  |  |
|
|
|
| Base Power (all gears) Net | 180 hp / 134 kW |
|
| VHP - gears 4-8 Net | 200 hp / 149 kW |
|
| VHP Plus - gears 1-3 Net | 180 hp / 134 kW |
|
| VHP Plus - gears 4-6 Net | 200 hp / 149 kW |
|
| VHP Plus - gears 7-8 Net | 220 hp / 164 kW |
|
| VHP - gears 1-3 Gross | 197 hp / 147 kW |
|
| Engine Model | CatŪ 3176C DITA ATAAC VHP |
|
| VHP - gears 4-8 Gross | 217 hp / 162 kW |
|
| VHP Plus - gears 1-3 Gross | 197 hp / 147 kW |
|
| VHP Plus - gears 4-6 Gross | 217 hp / 162 kW |
|
| VHP Plus - gears 7-8 Gross | 237 hp / 177 kW |
|
| VHP AWD on - gears 1-3 Gross | 217 hp / 162 kW |
|
| VHP AWD on - gears 4-8 Gross | 237 hp / 177 kW |
|
| VHP Plus AWD on - gears 1-3 Gross | 217 hp / 162 kW |
|
| VHP Plus AWD on - gears 4-6 Gross | 237 hp / 177 kW |
|
| VHP Plus AWD on - gears 7-8 Gross | 257 hp / 192 kW |
|
| Flywheel Power - Net | 180 hp / 134.23 kW |
|
| Displacement | 629 in3 / 10.3 L |
|
| Bore | 4.9 in / 125 mm |
|
| Stroke | 5.5 in / 140 mm |
|
| Torque rise | 50 % / 50 % |
|
| Max torque @ 1000 RPM | 841 lb ft / 1140 N·m |
|
| Speed @ rated power | 2000 RPM / 2000 RPM |
|
| Number of cylinders | 6 |
|
| Derating altitude | 10000 ft / 3048 m |
|
| Std - Fan speed - max | 1350 RPM / 1350 RPM |
|
| Std - Fan speed - min | 500 RPM / 500 RPM |
|
| Std - Ambient Capability | 117 ° F / 47 ° C |
|
| Flywheel Power - Variable | 180.07 hp / 134.28 kW |
|
| VHP - gears 1-3 Net | 180 hp / 134 kW |
|
|
|
| Gross Vehicle Weight - base | 35890 lb / 16280 kg |
|
| Gross Vehicle Weight - max | 51326 lb / 23281 kg |
|
| Gross Vehicle Weight, max front axles | 18322 lb / 8311 kg |
|
| Gross Vehicle Weight, max rear axles | 33004 lb / 14970 kg |
|
| Gross Vehicle Weight, base front axles | 10119 lb / 4589 kg |
|
| Gross Vehicle Weight, base rear axles | 25771 lb / 11691 kg |
|
| Operating Weight | 35890 lb / 16280 kg |
|
|
|
| Blade Width | 14 ft / 4.267 m |
|
| Blade Height | 27 in / 686 mm |
|
| Blade Thickness | 1 in / 25 mm |
|
| Arc radius | 16.25 in / 413 mm |
|
| Throat clearance | 3.5 in / 90 mm |
|
| Cutting edge - width | 8 in / 203 mm |
|
| Cutting edge - thickness | .63 in / 16 mm |
|
| End Bit - width | 8 in / 203 mm |
|
| End Bit - thickness | .63 in / 16 mm |
|
| Blade Pull - max GVW | 46193 lb / 20953 kg |
|
| Blade Pull - base GVW | 32229 lb / 14652 kg |
|
| Down Pressure - max GVW | 31161 lb / 14365 kg |
|
| Down Pressure - base GVW | 17482 lb / 7932 kg |
|
|
|
| Top Speed - Fwd. | 27.1 mph / 43.6 km/h |
|
| Top Speed - Rev. | 21.4 mph / 34.4 km/h |
|
| Turning radius (outside front tires) | 24.6 ft / 7.5 m |
|
| Steering Range - left/right | 50° |
|
| Articulation Angle - left/right | 20° |
|
| Fwd. 1st | 2.4 mph / 3.8 km/h |
|
| Fwd. 2nd | 3.2 mph / 5.1 km/h |
|
| Fwd. 3rd | 4.7 mph / 7.5 km/h |
|
| Fwd. 4th | 6.4 mph / 10.3 km/h |
|
| Fwd. 5th | 9.9 mph / 16 km/h |
|
| Fwd. 6th | 13.5 mph / 21.8 km/h |
|
| Fwd. 7th | 18.6 mph / 30 km/h |
|
| Fwd. 8th | 27.1 mph / 43.6 km/h |
|
| Rev. 1st | 1.9 mph / 3 km/h |
|
| Rev. 2nd | 3.5 mph / 5.6 km/h |
|
| Rev. 3rd | 5.1 mph / 8.1 km/h |
|
| Rev. 4th | 7.9 mph / 12.6 km/h |
|
| Rev. 5th | 14.7 mph / 23.7 km/h |
|
| Rev. 6th | 21.4 mph / 34.4 km/h |
|
|
|
| Fuel Tank | 105 gal / 397 L |
|
| Cooling system | 10 gal / 38 L |
|
| Hydraulic system - total | 20.8 gal / 80 L |
|
| Hydraulic system - tank | 9.9 gal / 38 L |
|
| Engine oil | 10.2 gal / 39 L |
|
| Differential / Final Drives | 12.4 gal / 47 L |
|
| Tandem housing (each) | 21.1 gal / 80 L |
|
| Front wheel spindle bearing housing | .13 gal / .5 L |
|
| Circle drive housing | 1.8 gal / 7 L |
|
|
|
| Forward/Reverse Gears | 8 fwd/6 rev |
|
| Transmission | Direct drive, power shift |
|
| Brakes, Service | air-actuated, oil-disc |
|
| Brakes, Service - surface area | 3712 in2 / 23948 cm2 |
|
| Brakes, Parking | manual, multiple oil-disc |
|
| Brakes, Secondary | air actuated, oil-disc |
|
|
|
| Circuit type | Closed center load sense |
|
| Pump type | Axial piston |
|
| Pump output @ 2100 RPM | 54.4 gal/min / 206 L/min |
|
| Maximum system pressure | 3500 psi / 24150 kPa |
|
| Reservoir tank capacity | 14 gal / 53 L |
|
| Standby pressure | 450 psi / 3100 kPa |
|
|
|
| Circle - diameter | 60.2 in / 1530 mm |
|
| Drawbar - height | 5 in / 127 mm |
|
| Drawbar - thickness | 3 in / 76 mm |
|
| Front - top/bottom plate - width | 12 in / 305 mm |
|
| Front - top/bottom plate - thickness | 1 in / 25 mm |
|
| Front - side plates - width | 9.5 in / 241 mm |
|
| Front - side plates - thickness | .5 in / 12 mm |
|
| Front - linear weights - min | 112 lb/ft / 165 kg/m |
|
| Front - linear weights - max | 144 lb/ft / 213 kg/m |
|
| Front - section modulus - min | 127 in3 / 2083 cm3 |
|
| Front - section modulus - max | 291 in3 / 4785 cm3 |
|
| Front axle - ground clearance | 24.6 in / 625 mm |
|
| Front axle - front wheel lean | 18 Degrees / 18 Degrees |
|
| Front axle - oscillation angle | 32 Degrees / 32 Degrees |
|
| Circle - blade beam thickness | 1.2 in / 30 mm |
|
|
|
| Circle centershift - right | 34.7 in / 881 mm |
|
| Circle centershift - left | 33.4 in / 848 mm |
|
| Moldboard sideshift - right | 37.1 in / 943 mm |
|
| Moldboard sideshift - left | 33.5 in / 851 mm |
|
| Maximum blade position angle | 90 Degrees / 90 Degrees |
|
| Blade tip range (forward) | 40 Degrees / 40 Degrees |
|
| Blade tip range (backward) | 5 Degrees / 5 Degrees |
|
| Maximum shoulder reach outside of tires - right | 89 in / 2261 mm |
|
| Maximum shoulder reach outside of tires - left | 87.5 in / 2223 mm |
|
| Maximum lift above ground | 17.8 in / 452 mm |
|
| Maximum depth of cut | 30.3 in / 770 mm |
|
|
|
| Ripping depth, maximum | 18.2 in / 462 mm |
|
| Ripper shank holders | 5 |
|
| Ripper shank holder spacing - min | 21 in / 533 mm |
|
| Penetration force | 17740 lb / 8047 kg |
|
| Pryout force | 20460 lb / 9281 kg |
|
| Machine length increase, beam raised | 38.2 in / 970 mm |
|
|
|
| Front, V-Type: Working width | 46.6 in / 1184 mm |
|
| Front, V-Type: Scarifying depth, maximum | 11.5 in / 292 mm |
|
| Front, V-Type: Scarifier shank holders | 11 |
|
| Front, V-Type: Scarifier shank holder spacing | 4.6 in / 116 mm |
|
| Front, straight: Working width | 71 in / 1800 mm |
|
| Front, straight: Scarifying depth, maximum | 12.5 in / 317 mm |
|
| Front, straight: Scarifier shank holders | 17 |
|
| Front, straight: Scarifier shank holder spacing | 4.38 in / 111 mm |
|
| Rear: Working width | 91 in / 2300 mm |
|
| Rear: Ripping depth, maximum | 16.2 in / 411 mm |
|
| Rear: Scarifier shank holders | 9 |
|
| Rear: Scarifier shank holder spacing | 10.5 in / 267 mm |
|
|
|
| Height | 22.5 in / 572 mm |
|
| Width | 7.9 in / 201 mm |
|
| Sidewall thickness - inner | .63 in / 16 mm |
|
| Sidewall thickness - outer | .71 in / 18 mm |
|
| Drive chain pitch | 2 in / 51 mm |
|
| Wheel axle spacing | 60 in / 1522 mm |
|
| Tandem oscillation - forward | 15 Degrees / 15 Degrees |
|
| Tandem oscillation - reverse | 25 Degrees / 25 Degrees |
|
|
|
| Height - low profile cab | 123 in / 3131 mm |
|
| Height - high profile cab | 132 in / 3356 mm |
|
| Height - no cab | 122.2 in / 3103 mm |
|
| Length - counterweight to ripper | 398 in / 10097 mm |
|
| Width - outside front tires | 100.5 in / 2553 mm |
|
| Length - front axle to mid tandem | 243 in / 6169 mm |
|
| Length - front tire to end of rear frame | 343 in / 8713 mm |
|
| Length - front axle to moldboard | 99.1 in / 2518 mm |
|
| Length - between tandem axles | 60 in / 1523 mm |
|
| Width - outside rear tires | 96.7 in / 2457 mm |
|
| Width - tire center lines | 82.3 in / 2091 mm |
|
| Height to axle | 23.6 in / 600 mm |
|
| Height to exhaust stack | 122.2 in / 3103 mm |
|
| Height to top of cylinders | 119.2 in / 3028 mm |
|
| Ground clearance at trans. case | 13.5 in / 344 mm |
|
|
|
| Pump output (2500 rpm, 35000 kPa) | 46.2 gal/min / 175 L/min |
|
| Maximum operating pressure | 5080 psi / 35000 kPa |
|
| Minimum operating pressure | 800 psi / 5500 kPa |
|
| Motor displacement - high | 100.7 in3/rev / 1650 cc/rev |
|
| Motor displacement - low | 40.2 in3/rev / 660 cc/rev |
|
