Home / Equipment / Caterpillar Machines / Motor Graders / 24M Motor Grader
Caterpillar 24M Motor Grader
Caterpillar 24M Motor GraderThe 24M delivers multiple technological breakthroughs to give you the best return on your investment. |  |  |
|
|
|
| Base Power (all gears) Net | 533 hp / 397 kW |
|
| Engine Model | Cat® C18 ACERT™ |
|
| Displacement | 1104.5 in3 / 18.1 L |
|
| Bore | 5.7 in / 145 mm |
|
| Stroke | 7.2 in / 183 mm |
|
| Max torque | 1762 ft-lb / 2389 N·m |
|
| Speed @ rated power | 1800 RPM / 1800 RPM |
|
| Number of cylinders | 6 |
|
| Derating altitude | 11000 ft / 3352 m |
|
| Std - Fan speed - max | 1300 RPM / 1300 RPM |
|
| Std - Fan speed - min | 60 RPM / 60 RPM |
|
| Std - Ambient Capability | 122 ° F / 50 ° C |
|
|
|
| Gross Vehicle Weight - base | 137694 lb / 62457 kg |
|
| Gross Vehicle Weight - base, front axle | 41584 lb / 18862 kg |
|
| Gross Vehicle Weight - base, rear axle | 96110 lb / 43595 kg |
|
| Gross Vehicle Weight - max | 145808 lb / 66138 kg |
|
| Gross Vehicle Weight - max, front axle | 43887 lb / 19907 kg |
|
| Gross Vehicle Weight - max, rear axle | 101921 lb / 46231 kg |
|
|
|
| Blade Width | 24 ft / 7.315 m |
|
| Moldboard Height | 42 in / 1067 mm |
|
| Thickness | 2 in / 50 mm |
|
| Arc radius | 21.7 in / 550 mm |
|
| Throat clearance | 6.4 in / 162 mm |
|
| Cutting edge - width | 13 in / 330 mm |
|
| Cutting edge - thickness | 1.1 in / 29 mm |
|
| End Bit - width | 8 in / 203 mm |
|
| End Bit - thickness | 1 in / 25 mm |
|
|
|
| Height - front axle center | 33.8 in / 858 mm |
|
| Height - high profile cab | 175.3 in / 4452 mm |
|
| Height to exhaust stack | 170.2 in / 4322 mm |
|
| Height to top of cylinders | 151.4 in / 3846 mm |
|
| Ground clearance at trans. case | 23.9 in / 607 mm |
|
| Length - front tire to end of rear frame | 558.8 in / 14194 mm |
|
| Length - counterweight to ripper | 633.9 in / 16102 mm |
|
| Length - front axle to moldboard | 159.4 in / 4048 mm |
|
| Length - front axle to mid tandem | 404.6 in / 10278 mm |
|
| Length - between tandem axles | 90 in / 2285 mm |
|
| Width - tire centerlines | 135.8 in / 3450 mm |
|
| Width - outside rear tires | 166.3 in / 4225 mm |
|
| Width - outside front tires | 168.5 in / 4280 mm |
|
|
|
| Top Speed - Forward | 26.7 mph / 43 km/h |
|
| Top Speed - Reverse | 25.6 mph / 41.2 km/h |
|
| Turning Radius (outside front tires) | 40.7 ft / 12.4 m |
|
| Steering range - left/right | 47.5° |
|
| Articulation Angle - left/right | 25° |
|
| Fwd. 1st | 2.3 mph / 3.6 km/h |
|
| Fwd. 2nd | 3.5 mph / 5.7 km/h |
|
| Fwd. 3rd | 6 mph / 9.6 km/h |
|
| Fwd. 4th | 9.3 mph / 15 km/h |
|
| Fwd. 5th | 17.2 mph / 27.7 km/h |
|
| Fwd. 6th | 26.7 mph / 43 km/h |
|
| Rev. 1st | 3.4 mph / 5.4 km/h |
|
| Rev. 2nd | 8.9 mph / 14.3 km/h |
|
| Rev. 3rd | 25.6 mph / 41.2 km/h |
|
|
|
| Fuel Capacity | 350 gal / 1326 L |
|
| Cooling System | 24 gal / 90 L |
|
| Hydraulic system - total | 70 gal / 264 L |
|
| Hydraulic system - tank | 36 gal / 135 L |
|
| Engine Oil | 16 gal / 60 L |
|
| Differential / Final Drives | 49 gal / 184 L |
|
| Tandem housing (each) | 85 gal / 322 L |
|
| Circle drive housing | 2 gal / 7.5 L |
|
| Front wheel spindle bearing housing | 1 gal / 4 L |
|
|
|
| Forward/Reverse Gears | 6 Fwd / 3 Rev |
|
| Transmission | Automatic, electronic power shift |
|
| Brakes - service | Oil-actuated, oil-disc |
|
| Brakes - service, surface area | 15733 in2 / 101508 cm2 |
|
| Brakes - parking | Spring applied, hydraulically released |
|
| Brakes - secondary | Oil-actuated, oil-disc |
|
|
|
| Circuit type | Electro-hydraulic load sensing, closed center |
|
| Pump type | Variable piston |
|
| Pump output | 145 gal/min / 550 L/min |
|
| Maximum system pressure | 3500 psi / 24150 kPa |
|
| Standby Pressure | 450 psi / 3100 kPa |
|
|
|
| Circle - diameter | 103.6 in / 2631 mm |
|
| Drawbar - height | 8.5 in / 215 mm |
|
| Drawbar - thickness | .6 in / 16 mm |
|
| Front-top/bottom plate - width | 20.2 in / 514 mm |
|
| Front-top/bottom plate - thickness | 2 in / 50 mm |
|
| Front-side plates - width | 16.3 in / 415 mm |
|
| Front-side plates - thickness | 1 in / 25 mm |
|
| Front axle - ground clearance | 33.8 in / 858 mm |
|
| Front axle - front wheel lean | 18° |
|
| Front axle - oscillation angle | 32° |
|
| Circle - blade beam thickness | 6.3 in / 160 mm |
|
|
|
| Circle centershift - right | 210.2 in / 5338 mm |
|
| Circle centershift - left | 209.9 in / 5332 mm |
|
| Moldboard sideshift - right | 193 in / 4902 mm |
|
| Moldboard sideshift - left | 178.3 in / 4528 mm |
|
| Maximum blade position angle | 35° |
|
| Blade tip range (forward) | 40° |
|
| Blade tip range (backward) | 0° |
|
| Maximum shoulder reach outside of tires - right | 127.1 in / 3228 mm |
|
| Maximum shoulder reach outside of tires - left | 126.9 in / 3222 mm |
|
| Maximum lift above ground | 25 in / 634 mm |
|
| Maximum depth of cut | 25.9 in / 657 mm |
|
|
|
| Ripping depth, maximum | 17.9 in / 454 mm |
|
| Ripper shank holders | 7 |
|
| Ripper shank holder spacing - max | 23.8 in / 604 mm |
|
| Ripper shank holder spacing - min | 23.4 in / 593 mm |
|
| Penetration force | 26138 lb / 11856 kg |
|
| Pryout force | 38330 lb / 17386 kg |
|
|
|
| Height | 41 in / 1040 mm |
|
| Width | 13.9 in / 353 mm |
|
| Sidewall thickness - inner | 1 in / 25 mm |
|
| Sidewall thickness - outer | 1.2 in / 30 mm |
|
| Drive chain pitch | 3 in / 76 mm |
|
| Wheel axle spacing | 90 in / 2285 mm |
|
| Tandem oscillation - forward | 20° |
|
| Tandem oscillation - reverse | 20° |
|
